Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Need help with Modify Cylinder Upgrade

:

Upgrades & Modifications

Reply
 
Thread Tools
Old January 12th, 2010, 19:36   #1
RandyAB
 
Join Date: Nov 2009
Need help with Modify Cylinder Upgrade

Hello all.....bought a Modify cylinder/piston upgrade. The stainless cylinder has an eliptical hole in it which I assume goes to the rear. Is there a particular orientation for this? (ie: up, down, either side)? Thanks
RandyAB is offline   Reply With Quote
Old January 12th, 2010, 19:45   #2
StrikeFreedom
 
StrikeFreedom's Avatar
 
Join Date: Aug 2006
Location: Markham
Usually it's on the side, but really it doesn't matter. Just make sure it's near the spring guide side.
StrikeFreedom is offline   Reply With Quote
Old January 12th, 2010, 19:46   #3
RandyAB
 
Join Date: Nov 2009
Thanks Strike....you know what it is there for?
RandyAB is offline   Reply With Quote
Old January 12th, 2010, 19:53   #4
yuhaoyang
asexual lumbricus terrestris
 
yuhaoyang's Avatar
 
Join Date: Jan 2009
Location: Edmonton west
Send a message via MSN to yuhaoyang
porting to correct the air volume that gets shot through the barrel.
Matching it to the barrel length
__________________
Quote:
Originally Posted by Deftonius View Post
I'll bet Ronan was the one who sent that email.
Quote:
Originally Posted by Wilson View Post
The chinese steal everything. Haven't seen an original idea come out of that country yet.
yuhaoyang is offline   Reply With Quote
Old January 12th, 2010, 21:48   #5
RandyAB
 
Join Date: Nov 2009
How come the stock one doesn't have the hole?
RandyAB is offline   Reply With Quote
Old January 12th, 2010, 22:18   #6
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Because it's for a different barrel length, Depending on where the hole in the cylinder is dictates what barrel length it's for.

What gun do you have, and what length inner barrel do you have?
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old January 12th, 2010, 22:27   #7
Sha Do
 
Sha Do's Avatar
 
Join Date: Jun 2003
Location: No where to be seen......Hillsburgh
For example;
-a center ported cylinder would be for barrel lengths that are short (ie, MP5, P90)
-a 3/4 ported cylinder would be for medium length barrels (ie, MP5 SD6, M4)
-a non ported cylinder would be for long barrels (Ak, AUG, M16)

The reason for the porting is to match your cylinder volume to your barrel volume.
The reason for matching your volume is so you are not forcing more air than is needed down the barrel behind the BB. If you do, it creates a "blow by" effect, which causes an instability in the flight of the BB when it leaves the barrel.....throwing consistent accuracy out the window.

SHA DO
Sha Do is offline   Reply With Quote
Old January 12th, 2010, 22:47   #8
RandyAB
 
Join Date: Nov 2009
The gun is an SRC M4A1. I'm just curious because according to your explanation the stock cylinder should have been 3/4 ported. The inner barrel is 370mm.
RandyAB is offline   Reply With Quote
Old January 12th, 2010, 22:59   #9
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
370? Are you sure it's not 363 (standard M4 length)



That's the Prometheus version, the modify version will have ports like that, only with a much wider opening.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old January 12th, 2010, 23:01   #10
venture
 
venture's Avatar
 
Join Date: Jun 2005
Location: Halifax
Yup, should have been. When you put it back together put the proper cylinder for your barrel. Performance will be optomized then.
__________________

Visit us at :www.ventureairsoft.ca
venture is offline   Reply With Quote
Old January 12th, 2010, 23:20   #11
pawscal
Guest
Who will step up and make a pictogram of cylinder picture beside what its supposed to be used in? So we can post that up whenever we get a cylinder porting question.

Last edited by pawscal; January 13th, 2010 at 01:07..
  Reply With Quote
Old January 12th, 2010, 23:29   #12
RandyAB
 
Join Date: Nov 2009
What is the "proper cylinder"? The aftermarket one or the stock one? I got the 370mm spec from the 007 website.
RandyAB is offline   Reply With Quote
Old January 12th, 2010, 23:36   #13
StrikeFreedom
 
StrikeFreedom's Avatar
 
Join Date: Aug 2006
Location: Markham
370 or 363, how come the stock SRC cylinder is non-ported?
StrikeFreedom is offline   Reply With Quote
Old January 13th, 2010, 01:44   #14
Jugglez
 
Join Date: Feb 2005
Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401
Quote:
Originally Posted by RandyAB View Post
What is the "proper cylinder"? The aftermarket one or the stock one? I got the 370mm spec from the 007 website.
The cylinder that came with your Modify M4A1 cylinder set would be the appropriate cylinder for your barrel.


The lesser gun companies (especially the clone companies) cut all of corners when building their guns, putting the same non-ported cylinders in all their guns is not uncommon.
__________________
Jugglez is offline   Reply With Quote
Old January 13th, 2010, 11:30   #15
THe_Silencer
 
THe_Silencer's Avatar
 
Join Date: Jul 2009
Location: Hamilton,ON
I installed an Ak length tightbore in my P90. Would taping the port in my cylinder improve FPS?
__________________

It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle
-Founder of Steel City Hamilton Infantry and Tactics
-Certified level 43 Autosniper by Commander Amos

Last edited by THe_Silencer; January 13th, 2010 at 11:47..
THe_Silencer is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 20:41.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.