|
|
|
February 4th, 2009, 19:58
|
#16 |
|
*drool* i want
|
|
|
|
February 4th, 2009, 20:33
|
#17 |
|
That is seriously cool dude.
__________________
 "Yeah, though I walk through the Valley of the Shadow of Death, I will fear no Evil, for I am the meanest son-of-a-bitch in the Valley." |
|
|
|
|
February 20th, 2009, 22:46
|
#18 |
|
Updates!!
Thanks to a hacksaw and a welder, I introduce... real Enfield working trigger!  The magazine release is real too, but non-functional and welded in place.  No room in there for a full magazine! The mag is chopped down and waiting for final fitment next week.  I wish you all could see the ingenious method I used to have the trigger working properly.  The hollowed out and chopped magazine:  Dis-assembly step 1, view from the side.  Remove the stick magazine which is holding the metal clip in place:  Remove the metal clip, and the rear upper wood slides out. From there the entire receiver and barrel assembly slides out the back.  Current state (original Enfield sling)  Tested the gun last weekend, shoots fairly accurate and hard to 50 feet or so. I am pretty happy with the way it shoots. Stay tuned!
__________________
Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16 |
|
|
|
|
February 20th, 2009, 23:18
|
#19 |
|
AK Guru
|
You sir, do very impressive work. Thanks for the pictorials!
|
|
|
|
|
February 20th, 2009, 23:36
|
#20 |
|
In his Trunk!
|
Very nice dude!
The 1:6 justs adds a certain... je ne know what... Good work for sure.
__________________
"War must be, while we defend our lives against a destroyer who would devour all; but I do not love the bright sword for its sharpness, nor the arrow for its swiftness, nor the warrior for his glory. I love only that which they defend: the city of the Men of Numenor, and I would have her loved for her memory, her ancientry, her beauty, and her present wisdom. Not feared, save as men may fear the dignity of a man, old and wise." - J.R.R. Tolkien |
|
|
|
|
March 1st, 2009, 01:03
|
#21 |
|
|
Refinished the stock with a bit of oil, it was very faded in spots:
 Stock is attached to a nut welded to a plate bolted in place and held in place by a thing welded to the magazine welded to the trigger guard. LOL:  Tool for attaching the stock:  Real Enfield safety attached (non-functional):  Magazine welded up and painted:  Current status:  - Need to fabricate the receiver "cover" to hide the parts connecting the stock. - Need to fabricate a new bolt (Devcon didn't work) or find a way to attach the real steel bolt - Need to grease and lube the goods that make it work - Need to pin/hold down the barrel tighter Then she's done! I will get geared up and take some "action" shots soon. That will make Jerry shake in his bloody boots! :twisted:
__________________
Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16 |
|
|
|
|
March 1st, 2009, 01:17
|
#22 |
|
Very impressive so far. Looking forward to seeing the final product.
__________________
|
|
|
|
|
March 11th, 2009, 19:28
|
#23 |
|
that's some serious work
|
|
|
|
|
|
March 11th, 2009, 20:02
|
#24 |
|
Hot damn! I want one. Very nice job, I can't wait to see the finished product.
|
|
|
|
|
March 11th, 2009, 20:43
|
#25 | |
|
Official Crybaby Chairsofter
|
Very nice! I would love to take pics of a WWII game/kit/guns!
__________________
Quote:
|
|
|
|
|
|
May 2nd, 2009, 18:11
|
#26 |
|
Continueing Baker_Jeff's project
I was able to make and design the stock to reciever ring.  Made from 1 3/4 exshaust piping.    When I get home (Back to Petawawa, Ontario), I'm going to weld your end bracket to my reiever ring. And I'm thinking of upgrading her to a VSR. 
__________________
Last edited by arnold869; May 2nd, 2009 at 18:36.. |
|
|
|
|
May 2nd, 2009, 23:55
|
#27 |
|
|
Nice!!! I'm so happy you made progress with her already! Can't wait to see her done.
 Jeff
__________________
Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16 |
|
|
|
|
May 3rd, 2009, 00:07
|
#28 |
|
|
Nice purchase Arnold. Hopefully when and if you have Op Drug Bust 2, I'll get to see it myself. Too bad you're not close to me. I have a real steel Lee Enfield you could use as a guide for the parts you need to make...
__________________
|
|
|
|
|
July 3rd, 2009, 10:14
|
#29 |
|
Jeff great project,finish is perfect and great store
Super projet Jeff ! On pourrait s y tromper !!! |
|
|
|
|
|
October 13th, 2009, 19:44
|
#30 |
|
Hi!
Great project. I am going to make the same in Ukraine. Can anybody help me with blueprints or drawings for Lee Enfield N4 with exact sizes, cause its impossible to find any reference in Ukraine? Regards. |
|
|
|
|
  |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
