Advice on a Beretta GBB

namebrand · January 21st, 2006, 23:23

I am looking to get a fairly inexpensive GBB Beretta and I think I have narrowed it down to two guns. One is the HFC M190 Special Force ( Metal Slide & Frame ), and the other is the KJ Works M9 ( Full Metal Version ). I have seen a review of the KJW M9 on arnies but have not seen any reviews for the HFC M190. So, do you guys have any advice? They are both in the same price range, and are fairly cheap, both seem to be mostly metal though I am not sure what the FPS is on either of them. The HFC M199 Semi/Full Auto looks really nice but is a little more than I can afford at the moment.

So any advice would be great, unless you guys know of a better Beretta in that price range?

rat · January 21st, 2006, 23:31

i like my kjw m9 and it came STRONGLY recommended by several members on this forum.

realize that the trades are lacking and the metal is not the finest, but it delivers a nice weight, nice blowback and it is after all full metal propane ready.

hogue grips are a must on this GBB...no doubt!

Rumpel Felt · January 22nd, 2006, 03:10

KJW is your only option for cheap, metal and looking exactly like the real one. It seems to me to be the only smart choice for metal because you have to well over $500 to upgrade a bloody plastic Japanese one.

Captain Tenneal · January 22nd, 2006, 03:26

But the bloody japanese one will have 100% accurate trades!

(Not to mention, feel/looks a whole lot nicer than the KJ ever will)

The KJ, while extremely popular has been known for getting a few lemons in the batches, this is probably due to KJ's sort of 'lax' QC standards. One example was when somone's slide physically flew off, and they've been known to jam a bit (albeit, i've seen that with TM and KSC M9's as well so it might be the gun design itself).

Skirmish wise: Go for the KJ or the M190 (both have favorable reviews)
Collector wise: Avoid everyone except for WA, who apperantly have the most accurate trademarks on their handguns, but for some strange reason lack realism (Ie. KSC's M9 working decocker)

DuffMan · January 22nd, 2006, 03:56

The HFC is a VERY nice M9 copy. The trades leave MUCH to be desired, however.

Gryphon · January 22nd, 2006, 12:58

Quote:

Originally Posted by MuffinMan

Avoid everyone except for WA, who apperantly have the most accurate trademarks on their handguns, but for some strange reason lack realism (Ie. KSC's M9 working decocker)

The decocker certainly works on WA M9s. Just look at Calvin's next time you're at XT.

namebrand · January 22nd, 2006, 13:21

Well so far I am more toward the KJW than the HFC cause I have seen more than one post saying that pretty much all HFC are crap. I suppose pretty much everything needs to be taken with a grain of salt though.

Seems like so far most of you guys think the KJW is the better route. Does the HFC need any sort of upgrade for propane? I have not seen anywhere that says what type of gas each is built for. I had seen someplace that the HFC is basically the same as a TM M190 and so you can use TM parts and mags for it, can anyone confirm that or is that even worth concidering as a buying feature?

namebrand · January 22nd, 2006, 13:24

Don't suppose there's anyone in the Peterborough area with a KJW M9 that I could check out? I don't think there are any games in the area unfortunately.

Bob the Angry Potato · January 22nd, 2006, 13:51

Well, KJW is probably the way to go, as you can actually buy it in Canada. It seems that no-one has the HFC M190 around here, there are a few exceptions, though. KJW is more widely used, and have quite a good reputation (except for the odd lemon or pot-metal complaint). However, Arnies and AR's people seem to lean more towards the HFC.
However, I'll admit that the other HFC guns are crap.
As for the reviews, head to the Arnie's Airsoft Review Database, and to to the 3 different ones for the different sorts of HFC M190s. I believe you will be pleasantly surprised.

GMTII · January 22nd, 2006, 13:58

1

PsHycho Giraffe · January 23rd, 2006, 10:13

Hi. I'm a bit of an airsoft newbie and I'm going to use this thread instead of starting a new one. Sorry for the hijack. I'll be quick about it. Can you fit a silencer to any of these KJ works models? If so, which one?

GMTII · January 23rd, 2006, 11:55

1

Zyre · January 23rd, 2006, 15:58

another bonus of the KJ is the TM's parts are pretty much interchangable. Including magazines.

add me to the list of the people highly recommending the KJ, I've got about 3500 shots through mine, no problems.

PsHycho Giraffe · January 23rd, 2006, 15:59

Thanks much! That's exactly what I wanted to know.

namebrand · January 25th, 2006, 15:12

So would all M9 mags be interchangable?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 21st, 2006, 23:23	#1
namebrand Trader rating Join Date: Dec 2005 Location: Oshawa Ontario	Advice on a Beretta GBB I am looking to get a fairly inexpensive GBB Beretta and I think I have narrowed it down to two guns. One is the HFC M190 Special Force ( Metal Slide & Frame ), and the other is the KJ Works M9 ( Full Metal Version ). I have seen a review of the KJW M9 on arnies but have not seen any reviews for the HFC M190. So, do you guys have any advice? They are both in the same price range, and are fairly cheap, both seem to be mostly metal though I am not sure what the FPS is on either of them. The HFC M199 Semi/Full Auto looks really nice but is a little more than I can afford at the moment. So any advice would be great, unless you guys know of a better Beretta in that price range?

January 22nd, 2006, 03:26	#4
Captain Tenneal Formerly Muffinman Trader rating Join Date: Sep 2003 Location: Winnipeg, Manitoba	But the bloody japanese one will have 100% accurate trades! (Not to mention, feel/looks a whole lot nicer than the KJ ever will) The KJ, while extremely popular has been known for getting a few lemons in the batches, this is probably due to KJ's sort of 'lax' QC standards. One example was when somone's slide physically flew off, and they've been known to jam a bit (albeit, i've seen that with TM and KSC M9's as well so it might be the gun design itself). Skirmish wise: Go for the KJ or the M190 (both have favorable reviews) Collector wise: Avoid everyone except for WA, who apperantly have the most accurate trademarks on their handguns, but for some strange reason lack realism (Ie. KSC's M9 working decocker) __________________

January 22nd, 2006, 03:56	#5
DuffMan Trader rating Join Date: Feb 2004	The HFC is a VERY nice M9 copy. The trades leave MUCH to be desired, however. __________________ "He resisted. I asked him to comply." "Telling him to 'eat it, bitch' is not really a request."

January 21st, 2006, 23:31	#2
rat Trader rating Join Date: Feb 2005 Location: Montreal, PQ	i like my kjw m9 and it came STRONGLY recommended by several members on this forum. realize that the trades are lacking and the metal is not the finest, but it delivers a nice weight, nice blowback and it is after all full metal propane ready. hogue grips are a must on this GBB...no doubt!

January 22nd, 2006, 03:10	#3
Rumpel Felt Trader rating Join Date: Jul 2004 Location: Kitchener, Ontario	KJW is your only option for cheap, metal and looking exactly like the real one. It seems to me to be the only smart choice for metal because you have to well over $500 to upgrade a bloody plastic Japanese one.

January 22nd, 2006, 13:21	#7
namebrand Trader rating Join Date: Dec 2005 Location: Oshawa Ontario	Well so far I am more toward the KJW than the HFC cause I have seen more than one post saying that pretty much all HFC are crap. I suppose pretty much everything needs to be taken with a grain of salt though. Seems like so far most of you guys think the KJW is the better route. Does the HFC need any sort of upgrade for propane? I have not seen anywhere that says what type of gas each is built for. I had seen someplace that the HFC is basically the same as a TM M190 and so you can use TM parts and mags for it, can anyone confirm that or is that even worth concidering as a buying feature?

January 22nd, 2006, 13:24	#8
namebrand Trader rating Join Date: Dec 2005 Location: Oshawa Ontario	Don't suppose there's anyone in the Peterborough area with a KJW M9 that I could check out? I don't think there are any games in the area unfortunately.

January 22nd, 2006, 13:51	#9
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Well, KJW is probably the way to go, as you can actually buy it in Canada. It seems that no-one has the HFC M190 around here, there are a few exceptions, though. KJW is more widely used, and have quite a good reputation (except for the odd lemon or pot-metal complaint). However, Arnies and AR's people seem to lean more towards the HFC. However, I'll admit that the other HFC guns are crap. As for the reviews, head to the Arnie's Airsoft Review Database, and to to the 3 different ones for the different sorts of HFC M190s. I believe you will be pleasantly surprised. __________________ Age verifier- Halifax region

January 22nd, 2006, 13:58	#10
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 11th, 2012 at 16:05..

January 23rd, 2006, 10:13	#11
PsHycho Giraffe Banned Trader rating Join Date: Dec 2005 Location: Alberta	Hi. I'm a bit of an airsoft newbie and I'm going to use this thread instead of starting a new one. Sorry for the hijack. I'll be quick about it. Can you fit a silencer to any of these KJ works models? If so, which one?

January 23rd, 2006, 11:55	#12
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 11th, 2012 at 16:06..

January 23rd, 2006, 15:58	#13
Zyre Trader rating Join Date: Aug 2005 Location: Winnipeg	another bonus of the KJ is the TM's parts are pretty much interchangable. Including magazines. add me to the list of the people highly recommending the KJ, I've got about 3500 shots through mine, no problems.

January 23rd, 2006, 15:59	#14
PsHycho Giraffe Banned Trader rating Join Date: Dec 2005 Location: Alberta	Thanks much! That's exactly what I wanted to know.

January 25th, 2006, 15:12	#15
namebrand Trader rating Join Date: Dec 2005 Location: Oshawa Ontario	So would all M9 mags be interchangable?

Advice on a Beretta GBB

Airsoft Guns Discussion