M4/M16 Thread

dutch13 · June 25th, 2013, 22:21

I used an armorers wrench to take the delta ring off mine. Ended up breaking it just to get it off. And to take the front sight post off, I used a hammer and punch. The pins are tapered so you'll have to hit them out a certain way.

Zack The Ripper · June 25th, 2013, 23:55

jesster202: Thank you sir. Its a finely tuned styrene flinging beast.

Zack The Ripper · June 26th, 2013, 00:01

Quote:

Originally Posted by makinitbig

Love the paint job/finish on that.. I'm. Building a GBBR Mk18 right now and That's strikingly similar to what I want my finished product to look like. I guess I will have to make revisions to my design as to not be a copy cat. Lol

Rooster · June 26th, 2013, 01:13

Quote:

Originally Posted by dutch13

I used an armorers wrench to take the delta ring off mine. Ended up breaking it just to get it off. And to take the front sight post off, I used a hammer and punch. The pins are tapered so you'll have to hit them out a certain way.

That could be why I had trouble with the pins. I'll check em before I start. Thanks for the tip! Is there an easy way to tell?
I got my last KA delta ring off without breaking anything so I have faith this one will come off. I have a pretty heavy duty armorers wrench.

makinitbig · June 26th, 2013, 01:15

Quote:

Originally Posted by Zack The Ripper

Love the paint job/finish on that.. I'm. Building a GBBR Mk18 right now and That's strikingly similar to what I want my finished product to look like. I guess I will have to make revisions to my design as to not be a copy cat. Lol

I don't know if it could be possible to replicate. I was kind of going for a multicam snakeskin thing but it just turned into a dirty looking shi*mix that I ended up loving.

I basically dug through my paint bin. A base coat of black krylon + primer, dark green, and brown camo krylon, and light coyote and coyote brown Aervoe.

Zack The Ripper · June 26th, 2013, 09:02

Well, whatever you did, you did it right.

Wilkie · June 26th, 2013, 18:43

Turns out G&G is redesigning their Specter DR for the next run, so I'm waiting a few months. I'm hoping the next one will be in Dark Earth!

I picked up a Eotech 552, cause it was in stock at my field's tech's place, it will stay on the M4 until I get the Specter.

Zack The Ripper · June 27th, 2013, 08:59

I'll probably be grabbing one then too. I am going to be using my 553 on my Mk18, but I'm likely going to grab and build a second upper receiver for it (longer barrel) and add the DR to that bitch.

TANNER · June 27th, 2013, 11:49

Latest configuration of the VFC SR-15. Seems to be serving me well.

dutch13 · June 27th, 2013, 18:52

Since everyone is talking about those ka m4s, here's my primary right now.

Rooster · June 27th, 2013, 19:02

Looks great Dutch, almost the exact look I'm after with mine.

dutch13 · June 27th, 2013, 23:58

Figure ill post my mk18 as well. Needs a paint job though.

Acid44 · June 28th, 2013, 02:05

That's probably the best use of colour I've seen, crazy well balanced.

Oshiha · June 29th, 2013, 05:22

Got better shots:
First one is mine, second is my buddies.

For anyone who cares, these were shot with a 5D Mark II, 24-70 lens.

ThunderCactus · June 29th, 2013, 11:56

aaawwwwwww yeeeaaaahhhh

Quote:

Originally Posted by TANNER

Latest configuration of the VFC SR-15. Seems to be serving me well.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 25th, 2013, 22:21	#436
dutch13 Trader rating Join Date: Jul 2006 Location: Manitoba	I used an armorers wrench to take the delta ring off mine. Ended up breaking it just to get it off. And to take the front sight post off, I used a hammer and punch. The pins are tapered so you'll have to hit them out a certain way. __________________ Como estas bitches....

June 25th, 2013, 23:55	#437
Zack The Ripper Trader rating Join Date: Jul 2012 Location: CFB Shilo, MB	jesster202: Thank you sir. Its a finely tuned styrene flinging beast. __________________ Guardians of Asgaard Last edited by Zack The Ripper; June 25th, 2013 at 23:59..

June 26th, 2013, 09:02	#441
Zack The Ripper Trader rating Join Date: Jul 2012 Location: CFB Shilo, MB	Well, whatever you did, you did it right. __________________ Guardians of Asgaard

June 26th, 2013, 18:43	#442
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	Turns out G&G is redesigning their Specter DR for the next run, so I'm waiting a few months. I'm hoping the next one will be in Dark Earth! I picked up a Eotech 552, cause it was in stock at my field's tech's place, it will stay on the M4 until I get the Specter.

June 27th, 2013, 08:59	#443
Zack The Ripper Trader rating Join Date: Jul 2012 Location: CFB Shilo, MB	I'll probably be grabbing one then too. I am going to be using my 553 on my Mk18, but I'm likely going to grab and build a second upper receiver for it (longer barrel) and add the DR to that bitch. __________________ Guardians of Asgaard

June 27th, 2013, 11:49	#444
TANNER ChrisUK Trader rating Join Date: Aug 2008 Location: Toronto	Latest configuration of the VFC SR-15. Seems to be serving me well. __________________

June 27th, 2013, 19:02	#446
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	Looks great Dutch, almost the exact look I'm after with mine.

June 28th, 2013, 02:05	#448
Acid44 Trader rating Join Date: May 2008 Location: Scarborough, ON	That's probably the best use of colour I've seen, crazy well balanced. __________________ Why are you wearing that stupid man suit?

June 29th, 2013, 05:22	#449
Oshiha Trader rating Join Date: Jun 2012 Location: Edmonton, Alberta	Got better shots: First one is mine, second is my buddies. For anyone who cares, these were shot with a 5D Mark II, 24-70 lens. __________________ Team VG93 AEG : Custom G&P VLTOR M4 Magpul Masada ACR Bolt action: Tokyo Marui VSR-10 GSPEC

M4/M16 Thread

Airsoft Media