Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > General > Canadian Airsoft News Stand
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

FCC 2013 new release

:

Canadian Airsoft News Stand

Reply
 
Thread Tools
Old March 19th, 2014, 19:48   #226
SuperHog
 
SuperHog's Avatar
 
Join Date: Jul 2011
Location: Toronto, Ontario
The motor should be rigid once the two dowel pins are press in which locks the motor in.
SuperHog is offline   Reply With Quote
Old March 19th, 2014, 20:22   #227
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
We've found the FCC pins to be loose
The pins only really stop the motor from rotating
With Austin's FTW, the motor had shifted sideways during normal operation and disengaged from the bevel gear.
ThunderCactus is offline   Reply With Quote
Old March 20th, 2014, 08:43   #228
SuperHog
 
SuperHog's Avatar
 
Join Date: Jul 2011
Location: Toronto, Ontario
If it is shifting along the armature shaft axis, the armature wasn't shimmed properly.
SuperHog is offline   Reply With Quote
Old March 20th, 2014, 12:48   #229
-Trooper-
a.k.a. Egria
 
-Trooper-'s Avatar
 
Join Date: Jul 2005
Location: Vancouver
I can tell you from my experience that there is a slight wobble with the motor. Seems like the pins weren't to spec.

If you check TW-Works it says that FTWs are cast bodies. I believe only the accessory parts of the gun are CNC'd.
http://www.airsoftcanada.com/showthr...&highlight=FCC
__________________


PURVEYOR OF FINE PARACORD PRODUCTS

www.beaconconceptsco.com

Click Here For ASC Thread

Team GHOSTS - G86
-Trooper- is offline   Reply With Quote
Old March 20th, 2014, 14:29   #230
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I believe Austin's FCC 2.5 moved up and down about 3mm, it had the most armature play of any TW motor I've seen so far lol
Mine wasn't much better before I reshimmed it
Although I think they mounted their armature too low on the shaft, every time I reshim an armature the shaft is .2mm shy of the end of the bearing. Whereas the systema usually sticks out of the bearing a little. So with the FCC you have to mount the pinion gear fairly high and loctite it in place, whereas the systema you can bottom it out on the flat, ensuring it will never ride down.
ThunderCactus is offline   Reply With Quote
Old April 8th, 2014, 09:49   #231
-Trooper-
a.k.a. Egria
 
-Trooper-'s Avatar
 
Join Date: Jul 2005
Location: Vancouver
I finally found some time to take a look at my gun. There is a slight wobble with the motor the lets it move left to right, however, not enough movement to do any damage. There is no play up or down. The motor hole is also dead center. Other than that, there is nothing else out of the ordinary with my gun.
__________________


PURVEYOR OF FINE PARACORD PRODUCTS

www.beaconconceptsco.com

Click Here For ASC Thread

Team GHOSTS - G86
-Trooper- is offline   Reply With Quote
Old April 8th, 2014, 10:36   #232
Azathoth
 
Azathoth's Avatar
 
Join Date: Feb 2008
Location: Red Deer
https://www.youtube.com/watch?v=uhP2YYd2BsI


Frank this is Austin's gun? I found a solution that will fix the motor issue 100% (sold him a systema)

I believe Kullwarrior is running a FCC2.5 in his 2008 PTW. The motor screeches and makes an awful sound. The FCC2.5 motor also cannot pull a M150 either. The engagement between the pinion gear is likely the culprit.
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver View Post
it would appear I am not first up in this gang-bang
---
WANTED PTW Receiver PRIME, STG, Factory
Azathoth is offline   Reply With Quote
Old April 8th, 2014, 23:38   #233
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
The 2.5s lack torque, it's evident in active braking where the sector gear typically overshoots the normal stopping position when the receiver is open.

Trooper, good to here they got at least one receiver right!
ThunderCactus is offline   Reply With Quote
Old September 29th, 2014, 18:24   #234
Ricochet
How much sand CAN you fit in your vagina!?
 
Join Date: Feb 2008
Location: North Delta, BC (Greater Vancouver)
What's the future of FCC? Are they giving up, or are they going to take another kick at the cat?
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...
Ricochet is offline   Reply With Quote
Old September 29th, 2014, 19:45   #235
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
Quote:
Originally Posted by Ricochet View Post
What's the future of FCC? Are they giving up, or are they going to take another kick at the cat?
I hope they continue. They have been a boon for Systema parts and service. And I can ask way more for Systema parts now.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > Canadian Airsoft News Stand

Bookmarks
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 14:10.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.