Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

we 416/m4 feeding issues.

:

Doctor's Corner

Reply
 
Thread Tools
Old May 23rd, 2013, 15:37   #1
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
we 416/m4 feeding issues.

so my we 416 has started to have feeding issues. Itll double feed even tripple feed then not feed then itll drop a bb just out the end of the barrel or fire it only a few feet then itll fire fine.
I tryed short loading mags to see if it was that the bbs wer too tight to feed well no luck.
Here is a baisic.
First shot dbl feed seccond shot dbl feed third shot drops at 5 feet fourth does the same fith dbl feeds then it will empty the mag fine. Itll do this on a full mag or a mag with 10 bbs in it. Im confused. It did work fine this just started on the long weekend.
I cleaned and relubed everything still acting strange.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old May 23rd, 2013, 16:55   #2
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
Pull the charging handle, see if the nozzle spring back freely?
Fire with empty mag see if the blow back cycle normal?
Remove the bolt see if any dry and damage o-ring or even cracked nozzle?
Those are the things come up in my mind for your trouble shooting!

In GBB, it contains mostly metal and a bit of plastic parts, also o-rings. Some of the early stage problems could cause by the parts are out of spec. After certain time of using, wear out or broken parts are commonly happening. Most of us are using propane, when liquid gas releases and turns into gas form will draw alot of energy around and create an extreme low temperature to freeze up everything in around. Regular O-rings will be freezed up and become sticky or even crack in long term. That's why we have to add the right amount of oil to keep it lubed. too much or too less are no good. If you are able to get the low temperature type of o-rings in the right size, that's even better. when you have this concept in mind, trouble shoot your GBB will be a lot easier. Hope that helps.
__________________
aka Uncle


Last edited by N_Force; May 25th, 2013 at 08:55..
N_Force is offline   Reply With Quote
Old May 23rd, 2013, 17:19   #3
Kos-Mos
 
Kos-Mos's Avatar
 
Join Date: Nov 2005
Location: LĂ©vis (QC)
your hop-op rubber is diying and/or the o-ring on the nozzle piston is dry.

Try that adding a few drops of silicon oil right on the ring and cycle it with your fingers.
__________________
Quote:
Originally Posted by Drake View Post
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
Kos-Mos is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 17:29.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.