![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
TM G17 cycling issues
Hey guys, I am having some trouble with my G17. I have a PGC slide on it. I upgraded the recoil spring, seer torsion, hammer spring, trigger bar spring.
First of all, the gun would shoot fine, but after the shot, the next BB gets fed into the chamber, but the gun would not be cocked. I have to cock it again manually. Second of all, after manually cocking the gun and shooting it a few rounds, it does the little *pouf* like if the hammer didnt hit the valve hard enough to let the gas out. The mags are still filled though. Anybody could help me for that matter? Chen~ |
|
![]() |
![]() |
![]() |
#2 |
Probably fitment issues with the slide and frame.
Make sure to lube the rails and check for friction. The slide shouldn't wobble but it shouldn't be so tight you feel the slide grinding when pulling it back. |
|
![]() |
![]() |
![]() |
#3 | |
Quote:
Cheers! Sent from my MIX 2S using Tapatalk |
||
![]() |
![]() |
![]() |
#4 |
![]() |
![]() |
![]() |
#5 | |
Quote:
My suggestion was under the impression all the other parts were drop-in without fitment issues. |
||
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |