|
|
|
March 31st, 2008, 13:29
|
#106 |
|
Division
|
Thats looking hot Crunch! I'm still waiting for my 552, probably get some VN mags.
__________________
 Weee! |
|
|
|
March 31st, 2008, 13:32
|
#107 |
|
What products do I need to eliminate the barrel wobble?
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu  
|
|
|
|
|
March 31st, 2008, 13:34
|
#108 | |
|
BALLET, TYPE: SELF LOATHING, ANALBURST
|
Quote:
|
|
|
|
|
|
March 31st, 2008, 13:35
|
#109 |
|
I have no barrel wobble on mine. But knowing how parts on JG guns tend to be loose out of the box, I'd suggest you remove the RIS and see if the barrel is tightly attached to the body. I'd suspect that the nut is probably loose. I had to tighten pretty much ever nut, bolt and screw (except the barrel) on both my JG guns when I got them, as they were all loose.
__________________
|
|
|
|
|
March 31st, 2008, 13:35
|
#110 | |
|
|
Quote:
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu
|
|
|
|
|
|
March 31st, 2008, 13:38
|
#111 |
|
Division
|
just take off the RIS and tighten the ring
__________________
Weee! |
|
|
|
|
March 31st, 2008, 13:42
|
#112 |
|
Division
|
You might need some spacers though, if you tighten the nut too much, your screw for the RIS will chafe along the nut and loosen it again.
__________________
Weee! |
|
|
|
|
March 31st, 2008, 13:55
|
#113 |
|
Electrical tape at the perfect place and everything should be okay.
__________________
 P.M.C. - Prostituée Militaire de Campagne. |
|
|
|
|
March 31st, 2008, 14:29
|
#114 |
|
|
I can't get my RIS off. Here are same pics. I took all the screws out seen here. 4 in total. Sorry bout the quality, I took them with my PS3 Cam.
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu
Last edited by ILLusion; June 15th, 2008 at 12:42.. |
|
|
|
|
March 31st, 2008, 14:35
|
#115 |
|
|
Removal of the front RIS shouldn't require you to remove the rail on the upper receiver. You have to remove the rail from the front barrel. Not sure exactly what's involved, as I haven't done it myself.
__________________
|
|
|
|
|
March 31st, 2008, 14:41
|
#116 | |
|
|
Quote:
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu
|
|
|
|
|
|
March 31st, 2008, 14:43
|
#117 |
|
|
I GOT IT OFF!!!!!!!! You gotta get a little nasty with her.
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu
|
|
|
|
|
March 31st, 2008, 15:05
|
#118 |
|
Division
|
lol are you serious, all you do is screw off the bolt beneath the RIS using an allen wrench and it slides right off.
__________________
Weee! |
|
|
|
|
March 31st, 2008, 15:08
|
#119 | |
|
|
Quote:
__________________
|
|
|
|
|
|
March 31st, 2008, 15:20
|
#120 |
|
|
I'm just learning about the intricacies of the AEG. I took it RIGHT down and studied it well. I'm a welder/fabricator and very good at detailed construction / de-construction.
And the RIS was quite tight. I got the wobble fixed too. Thanks alot guys. Long live the 416
__________________
To save the trouble of Ancorp reading it in every post: Inokatsu
|
|
|
|
  |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
