Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tm glock mag fill valve

:

Doctor's Corner

Reply
 
Thread Tools
Old December 18th, 2015, 22:03   #1
Chairs
 
Join Date: Aug 2015
Location: Saskatchewan
Tm glock mag fill valve

Hey guys having issues with my tm g18 mag that came with my pistol. I'd say maybe 20 full uses of mag with nothing but green gas and my fill valve seems fubared. Will dump gas as fast as I can fill it. Tried pulling the Valve and cleaning /oil it and still seems to dump out the gas. So do I replace or is there another thing to try?
Chairs is offline   Reply With Quote
Old December 18th, 2015, 22:13   #2
redzaku
 
redzaku's Avatar
 
Join Date: Jul 2010
Location: Edmonton
If it spraying gas from the fill valve, that's normal, because tm do not have o rings in the fill valve. Just fill it for 5 to 6 second and it should be full
__________________
Love and Tolerance
Coffee, what purpose does these serve?
А ну, чики-брики и в дамки!
За Родину!
BRRRRRT!
redzaku is offline   Reply With Quote
Old December 18th, 2015, 22:38   #3
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
find o rings that fit....
put o ring in
????
profit


edit: btw, the plastic gas adapters fit/seal a bit better on tm mags but you still have to get the angle right, straight in will reduce the gas spraying out, on an angle you get a geyser of egg gas face smell.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old December 19th, 2015, 07:48   #4
Chairs
 
Join Date: Aug 2015
Location: Saskatchewan
It's not the spraying Thats normal to the tm mags. Like I said I had used it 20 or so times no issue. What's happening is when I fill it it sprays and any gg That does make it into the mag vents out the fill port in seconds. No small leak I mean draining just As fast a guy can fill it.
Chairs is offline   Reply With Quote
Old December 19th, 2015, 07:49   #5
Chairs
 
Join Date: Aug 2015
Location: Saskatchewan
And I thought shoving small o rings into them was not the right thing to do? I just done some research but haven't seen anyone describe exactly what mine is doing.
Chairs is offline   Reply With Quote
Old December 19th, 2015, 07:57   #6
Rusty Lugnuts
Fainting Goat, Dictator of Quinte West
 
Rusty Lugnuts's Avatar
 
Join Date: Nov 2011
Location: Cobourg Ontario
No offence but try and get a second opinion from a more experienced person, the guys are talking about the small o rings that stop gas from filling at the end of filling, is yours venting after you have pulled it away from the fill source?. http://www.airsoftcanada.com/showthread.php?t=169381
Rusty Lugnuts is offline   Reply With Quote
Old December 19th, 2015, 10:33   #7
Chairs
 
Join Date: Aug 2015
Location: Saskatchewan
Yes continues to vent after pull the gas can away
Chairs is offline   Reply With Quote
Old December 19th, 2015, 11:08   #8
Rusty Lugnuts
Fainting Goat, Dictator of Quinte West
 
Rusty Lugnuts's Avatar
 
Join Date: Nov 2011
Location: Cobourg Ontario
Fill the mag and quickly stick it under water to be ABSOLUTELY POSITIVE that you have the correct leak source identified. if so order new fill valve. http://www.ventureairsoft.ca/item.ph...8632f524b26622
Rusty Lugnuts is offline   Reply With Quote
Old December 20th, 2015, 14:38   #9
Chairs
 
Join Date: Aug 2015
Location: Saskatchewan
Water trick worked. Was the whole bottom plate that was leaking. Came loose somehow and spewing gas around the fill valve and back edge too. Thanks for the info guys!
Chairs is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 18:21.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.