Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Spring Rifle Slam Firing Causes and Solutions

:

Upgrades & Modifications

Reply
 
Thread Tools
Old August 2nd, 2019, 13:59   #1
john3302
 
Join Date: Jul 2019
Spring Rifle Slam Firing Causes and Solutions

I would like to compile a list on spring rifle slam firing causes and solutions. Any feedback would be appreciated.

Most common:

Broken sear in trigger / Replace sear

Broken sear spring in trigger / Replace spring

Piston out of alignment or too dirty / Remove cylinder head. Take piston, spring guide and spring out. Clean, lube and reinstall.

Cylinder not centered and bolt pull loose / Check centering rings in receiver. They sit about an inch in on both ends of the receiver. If they have moved you can glue them back in place. If broken use UHMW tape or order new rings.

Spring guide stopper loose and slipping out into hollow area in trigger guard / Put plumbers putty, sticky foam or thick hardened glue into trigger guard hollow area where the bottom of the spring stopper sits to hold it up or replace with aftermarket trigger guard. [This is rare and may be due to specs being off]
john3302 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 21:06.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.