|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 17th, 2009, 23:32
|
#1 |
|
Suburban Gun Runner
|
Removal of barrel
So I have a new full metal body and I am trying to remoce the barrel from the original upper reciever so I can put it on my full metal one. I can't seemto remove it. CAn anyone tell me how this is done?
|
|
|
|
April 17th, 2009, 23:33
|
#2 |
|
G&G Gr16?
__________________
I love freedom and consequently America |
|
|
|
|
April 17th, 2009, 23:36
|
#3 |
|
Suburban Gun Runner
|
Yes
|
|
|
|
|
April 17th, 2009, 23:56
|
#4 |
|
|
Unscrew the delta ring set after taking off the RIS/handguards. That is the slip ring at the receiver that the handguard/ris slides into. After you unscrew that the barrel should come out, or you may even have to be pulling the barrel out while you are unscrewing the delta ring.
__________________
I love freedom and consequently America |
|
|
|
|
April 18th, 2009, 00:00
|
#5 |
|
Suburban Gun Runner
|
Thanks I wasn't sure if I just had to use force or what.
|
|
|
|
|
April 18th, 2009, 00:04
|
#6 |
|
|
Yeah, just gotta unscrew the delta ring. I was trying to remember back to when I had my TM M4 and how to do it lol. But yeah pretty simple. Just dont bend it after its off, the inner is still in there...
__________________
I love freedom and consequently America |
|
|
|
|
April 18th, 2009, 00:08
|
#7 | |
|
GabeGuitarded
|
Airsoft Canada
m102404's instructions were really helpful for me, because once you get it taken apart down to the outer barrel and upper receiver the barrel might be a bit stuck. Good luck 
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
