Black Talon Concepts Chimera Mosfet

[Blacktalon]

I've used tactile switch in earlier prototypes and I can tell you one thing for sure, they will not survive for long when you pull the trigger extremely hard. When it comes to tactile switches, once the switch is pressed down, any additional force you exert on the trigger will be applied directly to the switch's fragile body. A giant tactile switch like that of the PTW might be acceptable (the Spectre has no room for that), but the smaller ones likes the ones you listed are not.

I've played with 2 out of 3 of the switches in your links and those switches all failed in the "stuck down" position when the trigger was repeated pulled with enough force. Needless to say, sacrificing reliability just for a "tactile click" is out of the question. With the current design of the Spectre, I was able to hit the trigger with a hammer and have the trigger snap apart first while the Spectre hardly showed any signs of damage.

[Ron-E]

Anybody in Canada carrying this FET?? Very interested in purchasing one

[phloudernow]

Originally Posted by Ron-E

Anybody in Canada carrying this FET?? Very interested in purchasing one

you can buy directly from their website however it seems to be out of stock including the newer Sepctre as well......

PM if you are interested in other brands of Advanced mosfets Similar to them

[lanepratt]

Buy the specter unit for v2 all in one unit contained in the gearbox, A much better version of the aws raptor

[DrunkenTeddy]

Bit of an old thread, but I installed one of these in my VFC PDW and it fit like a charm, works fantastic. I love the burst/hold for auto setting and the braking works extremely well, you can basically gut your gearbox and just install this with your 3 gears, pretty impressive unit.