|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 5th, 2011, 18:51
|
#1 |
|
WE G36C safety knob
Hey guys!
I recently bought a WE G36C. what a beast! i just need a bit of help from the experts in this forum. I noticed that sometimes, i can not fully engage my safety switch; it just stays between safety and semi. If i pull the trigger,the knob will turn into semi. Also i had time to disassemble my g36 and noticed that it is really hard to turn the big black nut?? that holds the barrel to the gun. how did u guys remove it? one more question. What kind of Oil/grease you use? i have one of thos silicone oil from airsoft innovation and white lithium grease. Atm, the gun is nicely greased but in the future, i would need to re-lube/grease/oil it. Thanks! Ice |
|
|
|
|
February 5th, 2011, 19:05
|
#2 |
|
I'm not sure how the G36's are, but with armalites you can only put them into safe if the gun is cocked.
|
|
|
|
|
February 5th, 2011, 20:02
|
#3 |
|
yeah, the g36 only goes into safe if the gun is cocked.
__________________
Guardians of Asgaard |
|
|
|
|
February 5th, 2011, 21:07
|
#4 |
|
i think there are some threads around the forum with detailed maintenance guides... have a look around...they will tell you what to use
__________________
 Kingston airsoft, we do it better. |
|
|
|
|
February 5th, 2011, 21:24
|
#5 |
|
__________________
"marines don't die, they just regroup in hell" |
|
|
|
|
February 6th, 2011, 00:36
|
#6 |
|
WE uses a AR style trigger system in all the GBB, thus it cannot go on safe unless it's cocked. the Real H&K Firearm can go on safe with hammer dropped.
__________________
|
|
|
|
|
February 6th, 2011, 03:06
|
#7 |
|
^thanks guys!!!!!
Also, does the bolt catch work if i don't have the magazine inserted? Sometimes it catches the bolt when i pull the charging handle but sometimes it wont =\ is it just me? |
|
|
|
|
|
February 6th, 2011, 03:43
|
#8 | |
|
|
Quote:
You have to stick your hand into the magwell its the center rear area (like the magazine) push up and hold bolt back to lock it back. The release button was originally a Bolt Catch on the H&K
__________________
|
|
|
|
|
|
February 7th, 2011, 20:08
|
#9 |
|
To put the gun on safety you have to pull back the charging handle (as mentioned above). As for removing the barrel use a alan key/hex wrench to unscrew the giant nut around the barrel.
|
|
|
|
|
February 7th, 2011, 20:36
|
#10 |
|
For oil I use the same as my RS, just check it's a plastic/polymer friendly.
Nowadays they usually are but it's safer to check. The mention is usually on the back label.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting) 
|
|
|
|
|
February 16th, 2011, 13:29
|
#11 |
|
The massive retaining nut that holds the outer barrel into the body of the gun can be removed using a flat head screw driver as a lever. Be careful how much force is applied and use a controlled and rounded motion to turn the nut clockwise to remove. It's a snap to remove after you break it loose.
__________________
SNIPERSYN | Primus Inter Pares A$$WATER SERVICES LLC | Si Vis Pacem, Para Bellum 
|
|
|
|
|
February 16th, 2011, 13:53
|
#12 | |
|
|
Quote:
I'm not sure why there's this big trend of using real gun oils on GBBR's... just because they're more realistic doesn't mean you use the same lubricants. Real firearms don't have rubber compnants in them. What's safe for plastic may not be safe for rubber. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
