BBs rolling out new BA rifle

Huge · February 16th, 2015, 21:11

So I just took my CA M24 out of the box and BBs are rolling out the barrel when it points down. It is brand new. What could be wrong?

Danke · February 16th, 2015, 21:23

Not enough hop?

ebfud · February 16th, 2015, 21:34

Crappy hopup rubber could be the case too

ThunderCactus · February 16th, 2015, 21:54

most likely the hop is turned off. It only ever needs to be off when you're cleaning the barrel

Huge · February 16th, 2015, 22:13

I doubt it's that the hop up is off since I turn the screw CCW (augmenting hop) as much as possible without it sticking out so much that the cylinder catches it and the bolt cannot lock forward. Therefore, I cannot put more hop than it already has. But still, the BBs roll out when I angle the gun downwards.

Danke · February 16th, 2015, 22:36

A) http://www.airsoftcanada.com/showthread.php?t=170419 + B) http://www.airsoftcanada.com/showthread.php?t=170424 = Something aint right.

Before you apply any more force why not someone else have a look in person. Someone familiar with that platform.

Huge · February 16th, 2015, 22:39

Yeah I think it would be wise. I also contacted Mach1 from which I bought it. I mean, it is brand new, received it today and haven't touched a thing...

Huge · February 17th, 2015, 07:49

I took it now and something definitely is broken. What is that? Nub? There are two pieces like that that fell off when I took out the hop up assembly.

Heerven · February 17th, 2015, 10:47

I don't know if you shot already. I had a similar issue with my GBBR. I put accidentaly the hop up at max. Every shot, it was blocking the BB during the shot and right after the BB was rolling out of the barrel.. I just turn down the hop up and everything is fine.
Hope it can help

Huge · February 17th, 2015, 11:56

It fires fine, I just can't (I think) put any hop. It seems, as posted above, that the nub (again, I think) was broken out of the box. See pic above for details.

RainyEyes · February 17th, 2015, 12:00

You will need to post a more detailed picture than that!

This is only the outside chamber of the hopup. You need to inspect the inside of the chamber, the hop up rubber, the lever that pushes down on the rubber, as well as the spring and the ccw chamber.

venture · February 17th, 2015, 12:17

I see they are a participating retailer. Contact them and see what they will do to fix the situation.

Huge · February 17th, 2015, 12:18

Yeah I was wary about opening up the whole thing but I will. I thought just from the looks of the broken piece someone could tell what it is. Most people seem to think it's the nub. I will be upgrading to the PDI chamber and bucking so I will be switching it out soon anyway, but it is a major bummer to buy a brand new gun and receive it broken out of the box.

Huge · February 17th, 2015, 12:19

Quote:

Originally Posted by venture

I see they are a participating retailer. Contact them and see what they will do to fix the situation.

I have contacted Mach1 about it. They have been great throughout the whole transaction so far so we'll now see how they handle this.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 16th, 2015, 21:11	#1
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	BBs rolling out new BA rifle So I just took my CA M24 out of the box and BBs are rolling out the barrel when it points down. It is brand new. What could be wrong?

February 16th, 2015, 21:23	#2
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Not enough hop? __________________ Airsoft, where nothing is hurt but feelings.

February 16th, 2015, 22:36	#6
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	A) http://www.airsoftcanada.com/showthread.php?t=170419 + B) http://www.airsoftcanada.com/showthread.php?t=170424 = Something aint right. Before you apply any more force why not someone else have a look in person. Someone familiar with that platform. __________________ Airsoft, where nothing is hurt but feelings.

February 16th, 2015, 21:54	#4
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	most likely the hop is turned off. It only ever needs to be off when you're cleaning the barrel

February 16th, 2015, 22:13	#5
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	I doubt it's that the hop up is off since I turn the screw CCW (augmenting hop) as much as possible without it sticking out so much that the cylinder catches it and the bolt cannot lock forward. Therefore, I cannot put more hop than it already has. But still, the BBs roll out when I angle the gun downwards.

February 16th, 2015, 22:39	#7
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	Yeah I think it would be wise. I also contacted Mach1 from which I bought it. I mean, it is brand new, received it today and haven't touched a thing...

February 17th, 2015, 07:49	#8
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	I took it now and something definitely is broken. What is that? Nub? There are two pieces like that that fell off when I took out the hop up assembly. Last edited by Huge; February 17th, 2015 at 11:56..

February 17th, 2015, 10:47	#9
Heerven Trader rating Join Date: Nov 2009 Location: Montréal	I don't know if you shot already. I had a similar issue with my GBBR. I put accidentaly the hop up at max. Every shot, it was blocking the BB during the shot and right after the BB was rolling out of the barrel.. I just turn down the hop up and everything is fine. Hope it can help __________________ We will find a way.

February 17th, 2015, 11:56	#10
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	It fires fine, I just can't (I think) put any hop. It seems, as posted above, that the nub (again, I think) was broken out of the box. See pic above for details.

February 17th, 2015, 12:00	#11
RainyEyes Trader rating Join Date: Sep 2013 Location: Scarbororororough	You will need to post a more detailed picture than that! This is only the outside chamber of the hopup. You need to inspect the inside of the chamber, the hop up rubber, the lever that pushes down on the rubber, as well as the spring and the ccw chamber.

February 17th, 2015, 12:17	#12
venture Trader rating Join Date: Jun 2005 Location: Halifax	I see they are a participating retailer. Contact them and see what they will do to fix the situation. __________________ Visit us at :www.ventureairsoft.ca

February 17th, 2015, 12:18	#13
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	Yeah I was wary about opening up the whole thing but I will. I thought just from the looks of the broken piece someone could tell what it is. Most people seem to think it's the nub. I will be upgrading to the PDI chamber and bucking so I will be switching it out soon anyway, but it is a major bummer to buy a brand new gun and receive it broken out of the box. Last edited by Huge; February 17th, 2015 at 12:32..

BBs rolling out new BA rifle

Doctor's Corner