Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old September 14th, 2010, 19:31   #196
Thenooblord
Can't fix my own guns. Willing to fix yours.
 
Thenooblord's Avatar
 
Join Date: Jan 2009
Location: Sherwood Forest
Send a message via MSN to Thenooblord
well I put the sear back in and it seems to be working now, dunno why but I can't complain
__________________

Words to live by
Quote:
Originally Posted by Kid View Post
The apartment I am in right now costs $100 a month.
My average spending on food per day is less than $4.
My airsoft spending in the last month and a half has totaled over $1400.
They're called priorities. Get yourself some.
Thenooblord is offline   Reply With Quote
Old September 15th, 2010, 09:56   #197
LocoYokoPoco
a.k.a. ian209
 
LocoYokoPoco's Avatar
 
Join Date: May 2009
Location: Calgary, AB, Canada
So, after some pretty good jimmy riggin, I managed to get an aftermarket WE Charging handle to work.
__________________
World record in propane sniffing.

Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
LocoYokoPoco is offline   Reply With Quote
Old September 15th, 2010, 17:49   #198
SKI
 
SKI's Avatar
 
Join Date: Oct 2002
Location: Mississauga
Quote:
Originally Posted by Thenooblord View Post
Thank you for your incredibly helpful and constructive comment, remind me to tell you to go fuck yourself if I should meet you in person, along with some BB Bukakke in the groin.

Anyways, I'm suspecting the issue is related to the sear mechanism being tripped by something other than the bolt carrier (vibrations, body flex, etc) so the hammer falls early and doesnt hit the knocker squarely, because when it starts messing up it fires weakly like the hammer isn't hitting hard enough, possibly riding forward on the bolt carrier, I can be sure by removing the FA sear altogether and see if it misfires the same, then it would atleast help identify the issue.
Dude! You have met me and played along side me under my command. I also let you try out my KJW at the Twat field that same day. You couldn't stop jizzing over it. I have heard countless stories of your shit not working after you fucked with it. I am all for people who like to tinker and gain knowledge about their equipment but most stories I hear of you and from you are the result of you not knowing what you're doing. I guess you can't learn if you don't try but some professional guidance might be in order.....And don't ever speak to me like that again.
__________________
www.ctmotorsports.ca
SKI is offline   Reply With Quote
Old September 19th, 2010, 09:36   #199
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Is there some separated lower bodies available somewhere? A friend of mine has his pistol grip spot messed up, and of course it is a plastic one... PM would be appreciated
audi_bhoy is offline   Reply With Quote
Old September 19th, 2010, 13:25   #200
baker_Jeff
 
baker_Jeff's Avatar
 
Join Date: May 2008
Location: Edmonton, AB
Quote:
Originally Posted by audi_bhoy View Post
Is there some separated lower bodies available somewhere? A friend of mine has his pistol grip spot messed up, and of course it is a plastic one... PM would be appreciated
Checking for you
__________________
Founder of Capital Airsoft in Edmonton

Out of the Game 04/22/16
baker_Jeff is offline   Reply With Quote
Old September 19th, 2010, 20:23   #201
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Thanks!
audi_bhoy is offline   Reply With Quote
Old September 25th, 2010, 23:36   #202
LocoYokoPoco
a.k.a. ian209
 
LocoYokoPoco's Avatar
 
Join Date: May 2009
Location: Calgary, AB, Canada
Quote:
Originally Posted by LocoYokoPoco View Post
I'm having a few issues with mine Semi auto doesn't cycle properly (trigger doesn't reset after each shot), and the charging handle "blows back" when firing as well :/
For the record, if anyone is having the charging handle problem I had, I fixed it. I noticed that the cap on the end of the buffer tube was loose to a good extent, so I applied some loctite on it and screwed it back in really tightly. It worked like a charm. Too bad I had to go through 3 charging handles to figure that one out. :banghead:

Also the trigger problem was fixed by replacing the selector switch and reassembling the entire trigger assembly.
__________________
World record in propane sniffing.

Armory
-KWA Tavor TAR21 GBBR
-TM PX4 w/Detonator Aluminum Slide
LocoYokoPoco is offline   Reply With Quote
Old September 30th, 2010, 01:24   #203
grantmac
 
grantmac's Avatar
 
Join Date: Jul 2008
Location: Victoria, BC
Having a little issue with my CQBR and wondering if anyone has had a similar problem.

Its suffering cooldown quite noticeably, much more then when new.
In the final stages just the rear of the bolt will cycle without the front moving.

I'm running the cradle piston and velocity reducer.

Thanks,
Grant
grantmac is offline   Reply With Quote
Old September 30th, 2010, 17:01   #204
andrew321
 
andrew321's Avatar
 
Join Date: May 2007
Location: Winnipeg, MB
I had the exact same thing. T-hum ( creator of the cradle parts), made me aware of the ice that builds up during full auto shooting. It causes exactly what you say, jamming up the piston. Apparently they use a new "x-ring" that helps this, but im still waiting over two months for mine .... In the meantime, ask Amos about the RA tech upgrades... He seems to think they might show some promise.
andrew321 is offline   Reply With Quote
Old September 30th, 2010, 18:23   #205
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Yea still working on getting them.. RA-tech hasn't answered my recent emails yet

What type of lube are you using on the o-ring? An oil will thicken up, but a good grease will stay just as viscus.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old October 1st, 2010, 11:02   #206
grantmac
 
grantmac's Avatar
 
Join Date: Jul 2008
Location: Victoria, BC
Well I've been using a white lithium grease but I think I need something more of a petroleum jelly sort of consistency. Any suggestions would be great.

I have the X-ring on my piston.

The one thing I've noticed is there is not a very close fit between the piston and the cylinder wall. You'd think the blow-back would function much better with a decent seal.

Also the top seal (part # M15) on my mags are showing wear from the bolt-carrier sliding across them. Could it be my carrier has some extra casting flash or is out of tolerance?

Cheers,
Grant
grantmac is offline   Reply With Quote
Old October 1st, 2010, 11:25   #207
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
You shouldn't use white litium for sealing parts, after a while it gums up and does the opposite of what a lubricant should.

I'd suggest using a 100% pure silicon grease (ARS Sticky-G Silicon is what I use on all the GBB's)

If you find it's too thick you can put drop of silicon oil in and mix it around to cut it down.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old October 1st, 2010, 12:11   #208
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Anyone has a clue on how to take the hop-up unit and rubber out? Can't figure it out right now!
audi_bhoy is offline   Reply With Quote
Old October 1st, 2010, 12:18   #209
grantmac
 
grantmac's Avatar
 
Join Date: Jul 2008
Location: Victoria, BC
Anything of a more commercial nature that would work? Same lube for the mag-top seals?

Also any suggestions for metal to metal parts? I'm thinking moly for that.
grantmac is offline   Reply With Quote
Old October 1st, 2010, 12:32   #210
Castle
a.k.a. JLiu
 
Castle's Avatar
 
Join Date: Apr 2010
Location: Toronto, ON
Quote:
Originally Posted by grantmac View Post
Anything of a more commercial nature that would work? Same lube for the mag-top seals?

Also any suggestions for metal to metal parts? I'm thinking moly for that.
I'm currently using Permatex Ultra Slick Extreme Sport synthetic grease on mine. It can be found at CT.

(If that's a bad idea, someone please correct me!)
__________________

Castle is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 08:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.