This is an PTW thread

w1lp33 · March 7th, 2012, 21:05

Only thing was I had a hard time getting the barrel nut tight enough to hold the barrel and hold the bolt up plate firm. Couple buffer tube shims and I was set. She's rock solid now. Glad I bought the upper receiver vice block tho, can't imagine fighting it on there without it.

mcguyver · March 7th, 2012, 21:20

Quote:

Originally Posted by leblanc74

Finally you have seen the light.....there is no substitute....Real Steal all the way

I tried both CASV-EL also and the clones just gets marks too easily by just by clicking the rail together...

I always did. More or less. My last PTW for personal use had ARMS SIR, #40, EoTech, etc.

The new one (still waiting for 3 more little parts to arrive) is the most sugared up yet.

Karma_ · March 7th, 2012, 23:44

The Madbull rails are pretty nice. I've been impressed with most of them but the odd one does need slight modding where the rail makes contact with the lower receiver. Just a quick filing and a dust of paint and it's good to go. I haven't had issues with the barrel nuts not fitting the PTW's. Not yet anyway.

theshaneler · March 7th, 2012, 23:57

Quote:

Originally Posted by Karma_

The Madbull rails are pretty nice. I haven't had issues with the barrel nuts not fitting the PTW's. Not yet anyway.

lol YET... there is one in the mail on its way to you that doesn't seem to fit

Junky · March 8th, 2012, 09:50

Quote:

Originally Posted by Beowulfe

It's been a while since I posted to this thread.

HOLY SHAT! Thats a decent collection there Steve! 416 upper

nice

Karma_ · March 8th, 2012, 17:09

Quote:

Originally Posted by theshaneler

lol YET... there is one in the mail on its way to you that doesn't seem to fit

Done

Rush · March 8th, 2012, 20:23

Anyone have experience with this outer barrel? Seems rather cheap compared to the steel systema one.
DYTAC 12.5inch Mid-Length Outer Barrel
Wondering if its solely for the Magpul grip or if the Madbull RIS II would work with it.

Karma_ · March 8th, 2012, 21:47

^ The RIS II will work with it. I'm sent you a PM.

Beowulfe · March 9th, 2012, 16:57

Quote:

Originally Posted by Junky

HOLY SHAT! Thats a decent collection there Steve! 416 upper

nice

Thanks for that. I can't take much credit for the 416 upper, though. It belonged to Karma originally.

Junky · March 9th, 2012, 20:46

^ AHHHHH, I knew it looked familiar. I thought my front set was heavy... How's rocking the 203 upper all day long. Like last weekend @ Wolverines ?? I think thats the one I saw you with.

Karma_ · March 12th, 2012, 17:22

Heavily modified slide stock

Just waiting for the VFC SD front kit now...

TW5

Might as well put the whole little family. I have joint custody on two of them though...

Beowulfe · March 13th, 2012, 10:04

My family wants to adopt your TW5.

Junky · March 13th, 2012, 20:53

WICKED job on getting a slither stock on there!
Im gonna abduct your TW5 the first game I see you with it...

Shit... I shouldn't write my thoughts down for others to view.

Ok well, I guess I won't until you get an SD front set on there. Until then you are safe. I can't say what will happen after.

megaman · March 13th, 2012, 23:22

Chris... You has TW5????

Can I touch it ?

Karma_ · March 14th, 2012, 17:43

Quote:

Originally Posted by megaman

Chris... You has TW5????

Can I touch it ?

Totally.

Hey Alex, you can touch it too. They are pretty cool.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 7th, 2012, 23:44	#423
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	The Madbull rails are pretty nice. I've been impressed with most of them but the odd one does need slight modding where the rail makes contact with the lower receiver. Just a quick filing and a dust of paint and it's good to go. I haven't had issues with the barrel nuts not fitting the PTW's. Not yet anyway. __________________ *The cost of being legit is high*

March 8th, 2012, 20:23	#427
Rush formerly Medix Trader rating Join Date: Sep 2007 Location: Medicine Hat	Anyone have experience with this outer barrel? Seems rather cheap compared to the steel systema one. DYTAC 12.5inch Mid-Length Outer Barrel Wondering if its solely for the Magpul grip or if the Madbull RIS II would work with it. __________________ My only worry about death is that my fiancé will sell my gear for what I SAID I paid for it.....

March 8th, 2012, 21:47	#428
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	^ The RIS II will work with it. I'm sent you a PM. __________________ *The cost of being legit is high*

March 7th, 2012, 21:05	#421
w1lp33 Trader rating Join Date: Sep 2010 Location: Sarnia, Ontario	Only thing was I had a hard time getting the barrel nut tight enough to hold the barrel and hold the bolt up plate firm. Couple buffer tube shims and I was set. She's rock solid now. Glad I bought the upper receiver vice block tho, can't imagine fighting it on there without it.

March 9th, 2012, 20:46	#430
Junky formerly al3x_newton Trader rating Join Date: Sep 2006 Location: Calgary	^ AHHHHH, I knew it looked familiar. I thought my front set was heavy... How's rocking the 203 upper all day long. Like last weekend @ Wolverines ?? I think thats the one I saw you with.

March 12th, 2012, 17:22	#431
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	Heavily modified slide stock Just waiting for the VFC SD front kit now... TW5 Might as well put the whole little family. I have joint custody on two of them though... __________________ *The cost of being legit is high* Last edited by Karma_; March 12th, 2012 at 19:50..

March 13th, 2012, 10:04	#432
Beowulfe Trader rating Join Date: Apr 2007 Location: Calgary, AB	My family wants to adopt your TW5. __________________

March 13th, 2012, 20:53	#433
Junky formerly al3x_newton Trader rating Join Date: Sep 2006 Location: Calgary	WICKED job on getting a slither stock on there! Im gonna abduct your TW5 the first game I see you with it... Shit... I shouldn't write my thoughts down for others to view. Ok well, I guess I won't until you get an SD front set on there. Until then you are safe. I can't say what will happen after.

March 13th, 2012, 23:22	#434
megaman Trader rating Join Date: Jan 2008 Location: edmonton	Chris... You has TW5???? Can I touch it ? __________________

This is an PTW thread

Airsoft Media