Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tokyo Marui M870

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 1st, 2014, 19:02   #286
fuhrmanz
previously Bunker_King
 
fuhrmanz's Avatar
 
Join Date: Oct 2004
Location: Montreal, Quebec
Send a message via MSN to fuhrmanz
I try to find a place where I can get a M4 pistol grip and a crane stock to fit on the AG gas chamber. Anyone have an idea? Airsoftparts and airsoftstore don't have both of them. Thanks for your help!
__________________
Quote:
Originally Posted by Cliffradical View Post
Most, however, are garbage. But they're garbage that works.
Just like real AKs.
fuhrmanz is offline   Reply With Quote
Old January 26th, 2015, 22:45   #287
Ross
 
Ross's Avatar
 
Join Date: Nov 2009
Location: Winnipeg
does anyone know where we can get replacement parts for the TM breacher?
__________________
Ross is offline   Reply With Quote
Old January 26th, 2015, 23:50   #288
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
What parts you're looking for??
__________________
aka Uncle

N_Force is offline   Reply With Quote
Old January 27th, 2015, 00:04   #289
Danke
 
Danke's Avatar
 
Join Date: Oct 2007
Location: Danger Zone
Quote:
Originally Posted by fuhrmanz View Post
I try to find a place where I can get a M4 pistol grip and a crane stock to fit on the AG gas chamber. Anyone have an idea? Airsoftparts and airsoftstore don't have both of them. Thanks for your help!
Just find some buddies with WE M4s that have swapped grips and stocks.
__________________
Airsoft, where nothing is hurt but feelings.
Danke is offline   Reply With Quote
Old January 27th, 2015, 04:15   #290
Ross
 
Ross's Avatar
 
Join Date: Nov 2009
Location: Winnipeg
Quote:
Originally Posted by N_Force View Post
What parts you're looking for??

I'm looking for a tm breacher pistol grip.
__________________
Ross is offline   Reply With Quote
Old February 11th, 2015, 21:40   #291
jamuke
 
jamuke's Avatar
 
Join Date: Dec 2008
Location: Trono
looking for info on the 2 orings for the inlet valve in the stock, that the gas resevoir valve pushes into

can't find it on the parts diagram

sadly 1 of mine had shredded and the gas dumps with only 1 in
can anyone help me save $200 on an AG m4 resevoir purchase by
helping me with a $2 oring
also looking for a replacement butt pad unit
__________________
jamuke is offline   Reply With Quote
Old February 11th, 2015, 23:46   #292
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
I only have 870T-56, the one you need looks a bit thinner, not sure if they are the same.
__________________
aka Uncle

N_Force is offline   Reply With Quote
Old February 14th, 2015, 12:01   #293
fuhrmanz
previously Bunker_King
 
fuhrmanz's Avatar
 
Join Date: Oct 2004
Location: Montreal, Quebec
Send a message via MSN to fuhrmanz
If you do still have it in hand (oring), bring it to a local hardware store but with clerk behind a counter. I destroyed my AG oring and he found me some. Picked up 3 for 2.75$. If you can remove your part, bring it with you to test it.
__________________
Quote:
Originally Posted by Cliffradical View Post
Most, however, are garbage. But they're garbage that works.
Just like real AKs.
fuhrmanz is offline   Reply With Quote
Old February 15th, 2015, 15:42   #294
augherk
 
augherk's Avatar
 
Join Date: Apr 2012
Location: Mississauga
Any idea of the 870's compatibility with real steel as far as the pump/handguard goes? I hate how skinny the stock one is D: How much modification would it take to put a RS, or perhaps a maruzen pump on?

Last edited by augherk; February 17th, 2015 at 01:24..
augherk is offline   Reply With Quote
Old February 21st, 2015, 18:16   #295
jamuke
 
jamuke's Avatar
 
Join Date: Dec 2008
Location: Trono
Went with the Angry gun stock adaptor..it was great.. for a day..
I seem to now have developed a major leak from the front of the gun.

I have removed the stock, and lubed the o ring to the resevoir and oring around the mounting screw
but I still get all the gas just escaping out the loading area as if there is a seal missing, as it blows out just as fast as I fill..or something is stuck in an open position

the day before I had taken a few test shots when I first installed the AG stock and had great fun shooting but found the gas empty the next day, figured it just needed some rings lubed but now its gone all to shit
__________________
jamuke is offline   Reply With Quote
Old February 21st, 2015, 18:54   #296
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
http://airsoftcanada.com/showpost.ph...31&postcount=5

Do you think the gas leak is coming from between stock and receiver? Check above post, "fixing gas leak between stock and receiver". That possible after you changed the stock and leave some space on between. Get extra one more o-ring from dollar store, hope that is it, good luck.
__________________
aka Uncle

N_Force is offline   Reply With Quote
Old February 21st, 2015, 19:23   #297
jamuke
 
jamuke's Avatar
 
Join Date: Dec 2008
Location: Trono
Sadly no,
its definitely near the loading area around the brass tube and spring..somewhere inside around there
__________________
jamuke is offline   Reply With Quote
Old February 21st, 2015, 23:28   #298
fuhrmanz
previously Bunker_King
 
fuhrmanz's Avatar
 
Join Date: Oct 2004
Location: Montreal, Quebec
Send a message via MSN to fuhrmanz
the brass tube and the spring? I try to find it and cant see it. I did test mine and it kept the propane in for 1 week in the tube without leaking (it sit about 1 meter from my bed, I would smell it). I can only see it's an oring snapped or the valve is not tight enough/oring snapped.
__________________
Quote:
Originally Posted by Cliffradical View Post
Most, however, are garbage. But they're garbage that works.
Just like real AKs.
fuhrmanz is offline   Reply With Quote
Old February 21st, 2015, 23:41   #299
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
One of the reason I would like to keep both of my Marui M870 and breacher with original external gas tank, is that when I'm done gaming, I just remove the gas tank, without keeping the gas pressure in internal parts, it might reduce the life of use. Keep it healthier. Marui design for 134c mainly. Green gas and propane have excessive pressure to shorten life of use. Also can carry more extra tank for gaming. I have five tanks for breaher.
I suggest empty your AG gas tank after game use.
__________________
aka Uncle


Last edited by N_Force; February 21st, 2015 at 23:46..
N_Force is offline   Reply With Quote
Old February 22nd, 2015, 00:48   #300
jamuke
 
jamuke's Avatar
 
Join Date: Dec 2008
Location: Trono
Quote:
Originally Posted by fuhrmanz View Post
the brass tube and the spring? I try to find it and cant see it. I did test mine and it kept the propane in for 1 week in the tube without leaking (it sit about 1 meter from my bed, I would smell it). I can only see it's an oring snapped or the valve is not tight enough/oring snapped.
Where you load the shell you can see the brass tube and spring mech straight ahead..the gas seems to be venting about 1 cm to the right

I'm sadly going to break it down

Thanks for the help
__________________
jamuke is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:57.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.