Ares ms338 & ares ms700!

ThunderCactus · February 25th, 2013, 08:41

Reminds me of marui VSR-10 sears, will last a whole year at 380, but breaks immediately at 430 lol

wilekcmc · February 26th, 2013, 06:22

Here is what Ares says about the problem;

From: CS [mailto:cs@aresairsoft.com]
Sent: Tuesday, February 26, 2013 7:33 PM
To: John "Wile E" Russell
Subject: Re: Fwd: MS338 Slam Firing

Dear John,

Thank you for your opinion we will pass your information out production team.
For your information, we are developing a upgrade trigger set for the MS338, the whole unit will be in steel. Exact release date is not confirmed, but it will be available by this year.

Arktic · February 26th, 2013, 06:29

Thats good to hear! But expect the price to be quite high id imagine.

SuperHog · February 26th, 2013, 08:46

Is the upgrade free?

If not, then the Ares is not exactly lower cost than the competitor.

I have the VFC ASW338LM and that has worked flawless for and it does work with VSR10 upgrades. It seemed expensive at first, but the quality paid off.

Frogfish · February 26th, 2013, 10:23

Arktic,

Would your CNC guy be willing to do a run on the trigger parts. Its great Ares will have some out "this year" but there is no guarantee it won't be the exact same design, just with different materials.

I have an MSR on the way as well as a TM hop, and PDI hop, and a PDI cylinder set all in a TM VSR-10. I was planning on trying everything, and up until I saw you had a pattern for CNC trigger parts I was planning on modding the weapon to take a PDI V trigger....

Arktic · February 26th, 2013, 12:10

Quote:

Originally Posted by Frogfish

Arktic,

Would your CNC guy be willing to do a run on the trigger parts. Its great Ares will have some out "this year" but there is no guarantee it won't be the exact same design, just with different materials.

I have an MSR on the way as well as a TM hop, and PDI hop, and a PDI cylinder set all in a TM VSR-10. I was planning on trying everything, and up until I saw you had a pattern for CNC trigger parts I was planning on modding the weapon to take a PDI V trigger....

It would be happy to but it was done as a favor from a friend from the cnc guy at his work. I dont want to take advantage of his generosity. He does it in his spare time basically.

This rifle is actually quite a big disappointment. Im getting my locking bar back tomorrow from cnc so I can finally test out every thing this weekend. I have had this rifle over a month and only used it once....

Frogfish · February 26th, 2013, 23:17

Well I didn't mean for free, if he wants to make some cash in his free time let me know. However it sounds like just making the V trigger fit is the better idea.

Arktic · February 27th, 2013, 00:39

I will ask and see what he says. I was thinking of that as well but the ares trigger box is a lot smaller than any of the other triggers out there. So hopefully there is a way to make one of the other trigger boxes work.

oi102 · March 2nd, 2013, 15:09

Does anyone know by chance were a guy could pick one up in canada?

Hectic · March 2nd, 2013, 15:32

not yet that ive seen but try asking TA they may get it or be able to order one for you or find a retailer that ships to canada and be sure to confirm the fps meets the regulations

Frogfish · March 18th, 2013, 17:41

Arctik, anyway you would be willing to share your CAD file for the trigger parts?

Arktic · March 19th, 2013, 01:44

I would if I could. I didnt make them. They guy that did my parts drew up the cad files as well. Not sure if he still has them. I will ask him if he still has them.

wilekcmc · March 21st, 2013, 06:02

Well just got this in from Ehobbyasia, all i have to say is WOW

From: customerservice8 [mailto:customerservice8@ehobbyasia.com]
Sent: Thursday, March 21, 2013 1:29 PM
To: 'John "Wile E" Russell'
Subject: RE: Others

Dear Sir,

It is a factory fault because the sear dissipate too quickly. But we are sorry that we are unable to offer compensation over this issue.

Best Regards,

eHobbyAsia - CS8JC
www.ehobbyasia.com

Arktic · March 21st, 2013, 06:14

Wow so basically you are shit outa luck......

Man this gun is such a fail. Im just lucky I was able to have the parts made for me.

Frogfish · March 22nd, 2013, 15:13

I have to say mine shoots beautifully, but once it starts slam firing it'll be a wall hanger I guess... I still haven't dug into it to see if I can force a VSR trigger into it.... with the position of the magwell I don't think it'll be possible.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 25th, 2013, 08:41	#91
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Reminds me of marui VSR-10 sears, will last a whole year at 380, but breaks immediately at 430 lol

February 26th, 2013, 06:22	#92
wilekcmc Trader rating Join Date: Feb 2013 Location: Northern Japan	Here is what Ares says about the problem; From: CS [mailto:cs@aresairsoft.com] Sent: Tuesday, February 26, 2013 7:33 PM To: John "Wile E" Russell Subject: Re: Fwd: MS338 Slam Firing Dear John, Thank you for your opinion we will pass your information out production team. For your information, we are developing a upgrade trigger set for the MS338, the whole unit will be in steel. Exact release date is not confirmed, but it will be available by this year.

February 26th, 2013, 06:29	#93
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	Thats good to hear! But expect the price to be quite high id imagine.

February 26th, 2013, 08:46	#94
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	Is the upgrade free? If not, then the Ares is not exactly lower cost than the competitor. I have the VFC ASW338LM and that has worked flawless for and it does work with VSR10 upgrades. It seemed expensive at first, but the quality paid off.

February 26th, 2013, 10:23	#95
Frogfish Trader rating Join Date: Jan 2007	Arktic, Would your CNC guy be willing to do a run on the trigger parts. Its great Ares will have some out "this year" but there is no guarantee it won't be the exact same design, just with different materials. I have an MSR on the way as well as a TM hop, and PDI hop, and a PDI cylinder set all in a TM VSR-10. I was planning on trying everything, and up until I saw you had a pattern for CNC trigger parts I was planning on modding the weapon to take a PDI V trigger....

February 26th, 2013, 23:17	#97
Frogfish Trader rating Join Date: Jan 2007	Well I didn't mean for free, if he wants to make some cash in his free time let me know. However it sounds like just making the V trigger fit is the better idea.

February 27th, 2013, 00:39	#98
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	I will ask and see what he says. I was thinking of that as well but the ares trigger box is a lot smaller than any of the other triggers out there. So hopefully there is a way to make one of the other trigger boxes work.

March 2nd, 2013, 15:09	#99
oi102 Trader rating Join Date: Nov 2011	Does anyone know by chance were a guy could pick one up in canada?

March 18th, 2013, 17:41	#101
Frogfish Trader rating Join Date: Jan 2007	Arctik, anyway you would be willing to share your CAD file for the trigger parts?

March 19th, 2013, 01:44	#102
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	I would if I could. I didnt make them. They guy that did my parts drew up the cad files as well. Not sure if he still has them. I will ask him if he still has them.

March 21st, 2013, 06:02	#103
wilekcmc Trader rating Join Date: Feb 2013 Location: Northern Japan	Well just got this in from Ehobbyasia, all i have to say is WOW From: customerservice8 [mailto:customerservice8@ehobbyasia.com] Sent: Thursday, March 21, 2013 1:29 PM To: 'John "Wile E" Russell' Subject: RE: Others Dear Sir, It is a factory fault because the sear dissipate too quickly. But we are sorry that we are unable to offer compensation over this issue. Best Regards, eHobbyAsia - CS8JC www.ehobbyasia.com

March 21st, 2013, 06:14	#104
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	Wow so basically you are shit outa luck...... Man this gun is such a fail. Im just lucky I was able to have the parts made for me.

March 22nd, 2013, 15:13	#105
Frogfish Trader rating Join Date: Jan 2007	I have to say mine shoots beautifully, but once it starts slam firing it'll be a wall hanger I guess... I still haven't dug into it to see if I can force a VSR trigger into it.... with the position of the magwell I don't think it'll be possible.

Ares ms338 & ares ms700!

Airsoft Guns Discussion