FCC 2013 new release

MASAKO · August 20th, 2013, 16:56

Quote:

Originally Posted by wildcard

Start saving for Christmas

You are not joking, right ? AK platform, start to save up then. Too many list for this Christmas.

wildcard · August 20th, 2013, 17:01

Quote:

Originally Posted by MASAKO

You are not joking, right ? AK platform, start to save up then. Too many list for this Christmas.

Nope pending on the prototype its scheduled around Christmas but before that will be the .308/7.62 platform first ie. SR25, M110

SuperHog · August 20th, 2013, 23:15

It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

Dynamo · August 20th, 2013, 23:45

Quote:

Originally Posted by SuperHog

It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

CNCed pot metal is still pot metal.

SuperHog · August 20th, 2013, 23:52

The FCC budget series are also going to be pot metal.

I am also curious how many FCC CNC guns have been sold.

wildcard · August 21st, 2013, 00:38

Quote:

Originally Posted by SuperHog

It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

Quote:

Originally Posted by SuperHog

The FCC budget series are also going to be pot metal.

I am also curious how many FCC CNC guns have been sold.

i hope that will also include a more reliable motor, as far as I know there are
over 1000 units of 416D and other models (FFL and XM), mostly in Europe, South East Asia

In Canada probably around 100+ (I have 4)

wildcard · August 21st, 2013, 00:43

Just a little sneak peek.......Who wants one?

SuperHog · August 21st, 2013, 00:44

I think FCC make great guns, they need to set up more dealers worldwide for the budget series?

SuperHog · August 21st, 2013, 00:46

Quote:

Originally Posted by wildcard

Just a little sneak peek.......Who wants one?

How much $$$?

wildcard · August 21st, 2013, 00:48

Prototype only buddy not finished yet

ThunderCactus · August 21st, 2013, 09:50

Quote:

Originally Posted by wildcard

Nope pending on the prototype its scheduled around Christmas but before that will be the .308/7.62 platform first ie. SR25, M110

SR25 PTW??

wildcard · August 21st, 2013, 10:27

Quote:

Originally Posted by ThunderCactus

SR25 PTW??

yes, The boys will be busy through 2016 with the list of projects to be launch. these were on design phase right now.

ThunderCactus · August 21st, 2013, 10:35

So without thinking too far into it;
-regular cylinder
-longer mags with modified 5.56 internals, but the feed lips will be the same distance from the back of the mag so you can use the same cylinder
-same mechbox/motor
-'normal' SR25 receiver modified for use with PTW internals
-the outer barrel is going to make up for the length hold the hop chamber closer to the cylinder

that about right? lol

Oh also, Brad had pointed out the gap in the end plate of the MOE grip. Seems you guys are using MIAD end plates on a MOE grip. Since the new motor apparently produces very little heat, will they be revising the grip to use the proper end plates to seal the grip and prevent any crap from getting into the motor?

wildcard · August 21st, 2013, 11:24

Quote:

Originally Posted by ThunderCactus

So without thinking too far into it;
-regular cylinder
-longer mags with modified 5.56 internals, but the feed lips will be the same distance from the back of the mag so you can use the same cylinder
-same mechbox/motor
-'normal' SR25 receiver modified for use with PTW internals
-the outer barrel is going to make up for the length hold the hop chamber closer to the cylinder

that about right? lol

Oh also, Brad had pointed out the gap in the end plate of the MOE grip. Seems you guys are using MIAD end plates on a MOE grip. Since the new motor apparently produces very little heat, will they be revising the grip to use the proper end plates to seal the grip and prevent any crap from getting into the motor?

Nope, can't reveal the details but none of the design will derived from Systema, this and the next platform will be truly ground up FCC design.

ThunderCactus · August 21st, 2013, 13:11

Hm. Not totally appealing. I'd rather have good systema compatibility so I don't have to have a pair of SR25s to swap parts back and forth in the field.
I don't see any point to having a longer barrel/cylinder, most experts agree the shorter barrels are more accurate; the science is sound and we've got plenty of first hand experience that backs that up.
I REALLY want an SR25K though lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 20th, 2013, 23:52	#140
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	The FCC budget series are also going to be pot metal. I am also curious how many FCC CNC guns have been sold. Last edited by SuperHog; August 20th, 2013 at 23:55..

August 21st, 2013, 00:44	#143
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	I think FCC make great guns, they need to set up more dealers worldwide for the budget series? Last edited by SuperHog; August 21st, 2013 at 09:45..

August 20th, 2013, 23:15	#138
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	It is it good or bad timing for FCC with their budgets series when they have limited production capabilities? Systema announced that this fall their new M4s will be CNCed.

August 21st, 2013, 00:43	#142
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	Just a little sneak peek.......Who wants one?

August 21st, 2013, 00:48	#145
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	Prototype only buddy not finished yet

August 21st, 2013, 10:35	#148
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	So without thinking too far into it; -regular cylinder -longer mags with modified 5.56 internals, but the feed lips will be the same distance from the back of the mag so you can use the same cylinder -same mechbox/motor -'normal' SR25 receiver modified for use with PTW internals -the outer barrel is going to make up for the length hold the hop chamber closer to the cylinder that about right? lol Oh also, Brad had pointed out the gap in the end plate of the MOE grip. Seems you guys are using MIAD end plates on a MOE grip. Since the new motor apparently produces very little heat, will they be revising the grip to use the proper end plates to seal the grip and prevent any crap from getting into the motor?

August 21st, 2013, 13:11	#150
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Hm. Not totally appealing. I'd rather have good systema compatibility so I don't have to have a pair of SR25s to swap parts back and forth in the field. I don't see any point to having a longer barrel/cylinder, most experts agree the shorter barrels are more accurate; the science is sound and we've got plenty of first hand experience that backs that up. I REALLY want an SR25K though lol

FCC 2013 new release

Canadian Airsoft News Stand