Radios and You

[AnthonyG]

Probably the driver, not the chirp software. If you got a no-name programming cable like I did, make sure you aren't using the drivers that come with the cable. Windows also doesn't grab the correct driver by default, you will have to tell it which driver to use every time you plug in your cable.

There should be a YouTube tutorial out there explaining how to set up the correct/older driver.

Sent from my Nexus 5 using Tapatalk

[chaz]

Originally Posted by siggypoo

Problem is CHIRP doesn't seem to support my radios. Two Baofengs, a BF777S and a BF-F8+ and CHIRP doesn't see either.
Then again it's recently come into question about the quality of programming cord I have. AliExpress, y'know...

Error messages or just "nothing"?

[AnthonyG]

Originally Posted by siggypoo

Problem is CHIRP doesn't seem to support my radios. Two Baofengs, a BF777S and a BF-F8+ and CHIRP doesn't see either.
Then again it's recently come into question about the quality of programming cord I have. AliExpress, y'know...

Make sure you download and use the driver I have highlighted:

Prolific Driver 3.2.0.0

Can be found on this page: http://www.miklor.com/COM/UV_Drivers.php

That page has a thorough step-by-step. Has always worked for me. Just make sure you know what USB port you plug in to: COM1, COM2 etc...

When you open Chirp you'll want to "Download From Radio". As long as you have the right driver, or the proper USB cable, there should be no problem.

[Kozure]

Thank you for an excellent, straight-forward, informative read.

[demococcus]

Great article, thank you Cobrajr122!

[Banter1997]

its working