APS-2 Ex Help!!!!

[Kez]

Hey Guys, I picked up a Maruzen APS-2 EX yesterday, i brought it home and tried to get used to it because i got a scope with it also. So i was trying it out at a distance of around 20-30 feet and it was alright, time to time it was a off. So i tried it a little further away, because 20-30 feet is to close to sniping, and i realized that the hop up or soemthing was really wrong because the bbs keep going higher. Sometimes it even misses the target by around a foot! I'm not sure how to change the hop up or whatever thats causing the problem, so I need some help from you guys. If anyone knows a way to fix this problem with m APS-2 EX, PLEASE respond to my post, THANK YOU VERY MUCH!!. :salute:

[Bigmatty]

not sure if this link will work.....firewall at work prevents me form accessing it properly

www.outcastairsoft.ascuk.net/aps2exarticle.htm

[Kez]

Hey thanx for the link, but it also didnt work me too.Thanx a lot by the way. But do you know how to adjust the hop up for this gun or just change the aiming in general is you do please respond thanx... :salute:

[Bigmatty]

basically remove the mag, in side the chamber there should be a wee hex screw...that adjusts the hopup....its a pain in the ass. and it takes patience and time

[Kez]

Thanks a lot man, I'm gonna try it rite away. Thanx for the help!

[Kez]

Just to make sure, is the hex key hole thing behind the strut that shoots the bb?? I just want to make sure, and if u have a picture can u send it, if you dont its fine then thanx
:salute:

[Micky Three Thumbs]

Correct me if I'm wrong, because I could very well be, but doesn't the aps2 EX have a fixed hop-up? (meaning you cannot adjust it). Depending on the strength of your spring, I would reccomend just using heavier amunition.