Airsoft Canada - View Single Post

your-pastor · January 18th, 2012, 23:17

if it's the ns2 one i had the same problem. mine was caused because the loading part of the nozzle was worn/broken down and catching the bb between where the loader hits the bb and the bottom of the circular opening of the air nozzle (keep in mind this is all one part).

I fixed it by filing down the nozzle into a straight line so that the bb wouldn't catch, and it works perfectly now.
I didn't have to take off much surface area either, just enough that I could run a bb along the bottom of the nozzle to the middle where it should sit nicely on the opening of the nozzle before getting into the hop chamber.

I could have bought a new nozzle, but i got the gun from a friend for 20 bucks and didn't give a damn.

*EDIT*
whoops, my bad.

January 18th, 2012, 23:17	#10
your-pastor Trader rating Join Date: Sep 2007 Location: canada, bc, langley	if it's the ns2 one i had the same problem. mine was caused because the loading part of the nozzle was worn/broken down and catching the bb between where the loader hits the bb and the bottom of the circular opening of the air nozzle (keep in mind this is all one part). I fixed it by filing down the nozzle into a straight line so that the bb wouldn't catch, and it works perfectly now. I didn't have to take off much surface area either, just enough that I could run a bb along the bottom of the nozzle to the middle where it should sit nicely on the opening of the nozzle before getting into the hop chamber. I could have bought a new nozzle, but i got the gun from a friend for 20 bucks and didn't give a damn. EDIT whoops, my bad. __________________ EMT is king, Paypal if i have to +4% Last edited by your-pastor; January 19th, 2012 at 00:28..