Airsoft Canada - View Single Post

Arktic · January 23rd, 2013, 12:24

Another update from inside the trigger box.

I dremeled away the 45 degree sear and madea 90degree sear instead with a slight backward angle. I did the same to the piston. Both now have 90 degree surfaces and there is no slam firing now.

I sent off all three pieces of the trigger box to get CNC'd from stainless steel. The stock parts are actually very thick and dense. Im sure they will withstand very stiff spring no problem. But having steel parts will be much better in the long run.

January 23rd, 2013, 12:24	#77
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	Another update from inside the trigger box. I dremeled away the 45 degree sear and madea 90degree sear instead with a slight backward angle. I did the same to the piston. Both now have 90 degree surfaces and there is no slam firing now. I sent off all three pieces of the trigger box to get CNC'd from stainless steel. The stock parts are actually very thick and dense. Im sure they will withstand very stiff spring no problem. But having steel parts will be much better in the long run.