View Single Post
Old June 3rd, 2013, 14:26   #13
pestobanana
Squid Porn Superstar, I love the tentacles!
 
pestobanana's Avatar
 
Join Date: Nov 2008
Location: Richmond Hill and Waterloo, Ontario
Quote:
Originally Posted by Rabbit View Post
you DO get various results by changing out units - they all dont have the same dimensions and they all dont seal the same either.
Quote:
Originally Posted by Rabbit View Post
I've had nothing but horrible results in air seal with the PDI-W hold in various units - teflon tape is a MUST.
I would disagree to both, I've used all those different hop up units and seen no real difference. Yes Lonex units are made to different specs, but after modding it to fit it works fine.

As for the PDI W-Hold leaking, I've never had a leak with it, and I've never had to use teflon tape. Right now I have it in a M14, shooting a consistent 380 fps with a M100 spring. It also worked fine in my G36 and another M14, which was netting 455 FPS on a M120 spring.

Quote:
Originally Posted by airsoftjunky View Post
One thing I don't understand about the bridge tensioners, is they're to long to fit in most if not all barrel windows. Is trimming from both ends required to utilize them? Or are they designed to hang up on both ands of the barrel window then just push through more in the middle, if you will. I hope that made sense. :S
Yes they are too long, kinda annoying that they are too long to fit in Prometheus barrels. You do need to cut them with a razor blade so it fits snugly. My Firefly nub is actually the same length as my Prometheus ones, so I can't really blame Prometheus here lol
pestobanana is offline   Reply With Quote