Hello all, hopefully someone here will be able to help me..
I picked up a CB CQBR for $50,
I bought the OB conversion kit for it, along with 8 mags (4 being new MSK mags, 3 used metal mags, and 1 used MSK mag)
I also bought an NPAS for the plastic nozzle.
I swapped over the gun to OB, put it all back together and my very first shot, 3 BBs shot, none being put down the barrel. I opened the gun and found the 3 BB's spilling into the trigger area.
I looked around for something abnormal which I couldnt see, and tried again. This time, 2 BB's wound up being pulled from the magazine, none going down the barrel again and the ring of the nozzle snapped clean off in one piece.
The lower receiver has a crack from the bolt catch area, all the way underneath to the other side by the mag release. I purchased a replacement for this, as someone has told me it was possible the mag wasnt being positioned correctly and misaligning the BB's.
I read through these 26 pages looking for anyone with a similar problem, but no dice I think. I did read somewhere about not tightening down the delta ring too much? does this sound like my problem?
|