Quote:
Originally Posted by ToeTag
Hello people - so the gearbox fits this 16awg silicone wrapped (should have gone with Teflon) wire but I have to really force the motor into the grip as the space inside the pistol grip is not made for 16awg. AEG M4 is the gun.
Question - any options to make this grip fit like it should and still be able to use this gauge wire? I am thinking about grooves inside the grip and using a file to make it happen.... good or bad idea? I'm worried this would effect the angle of the motor on the bevel gear.
Thanks for any insight
|
Cutting grooves has come to my mind sometimes, too with that big wire. Make sure you are leading both wires up the back of the grip - one either side of the screw bump.
If you still have trouble, consider switching to a MIAD or MOE grip. They have much more room in them. I often run the positive wire in front of the motor (especially if it is short) with those grips.