[Solomance]

After TAC-11 had been cleaned up and we had a chance to relax. I had Shelledpants capture this shot of my collection.

Left to right.
Indoor-
Stock TM P90TR
7.4v lipo via deans

Outdoor-
TM P90TR
Re-shimmed, stronger spring.
410fps
11.1v lipo via deans

Parts/loner-
Stock TM P90RDS

All three were purchased used from ASC over the last 5 years.
Averaging one event a week be it a game or training at TTAC3.
Heavy trigger time and hundreds of thousands of rounds through them.

Other than a tappet plate going on the first one (parts) there have been no catastrophic failures.

All three have had issues with the trigger return springs in the front of the mech box. Most have been replaced with trimmed down bic lighter springs.

When I have experienced these failures in the field the ease of access to the mech box has made the repair simple and quick. And cost me quite a few lighters.

Finally having three setups with modular and interchangeable parts has let me squeeze a lot of life out of this very robust platform.