Quote:
Originally Posted by famidrive
Alright...trying this thread to see if there's anyone who could address this.
I thought it would be an issue with the leaf spring, but after stripping it,
testing it out...and doing what others suggest might fix the problem after
watching videos on youtube, I'm starting to doubt. What could be wrong?
I even tried a brand new leaf spring and the problem was still there.
|
Bend that leaf spring prong forward a bit, AT the existing bend. Do NOT bend it anywhere else along the length of it. Use the existing bend as your location. Use needle nose pliers to do this to get a precision bend. This applies a greater pre-load weight on the disconnector, which will push it back up as per normal operation.