Relax, as long as the mag is metal and pretty hefty there shouldn't be much risk of destroying it. Sometimes it takes a firm wack to take the pin out. Since its a roll pin it shouldn't have a knurled edge but you could try hammering from the other side. Sometimes when hammering a pin out they have to be hammered from a specific side.
Perhaps you could try to leave the mag in a hot car (no gas of course) and let the mag get nice and hot. Then maybe just maybe the metal in the mag will expand and allow the pin to come out a little easier. Just an idea.
Last edited by jordan7831; May 6th, 2012 at 20:59..
|