Airsoft Canada - View Single Post

BobbyDangerous · April 26th, 2018, 05:44

Nozzle?

Rip in the bucking?

How’s your selector switch? Is it tight? Weird as it sounds? I’ve gotten a gun that was like that. Maybe a little more sporadic but noticed the selector was tight. After upon examination I noticed whoever shimmed the gears had it tight and the selector plate was pushing on the bushing for the spur gear. Removed a shim and sanded down the selector plate for clearance and it solved the problem. If you’re getting decent contact though and it’s all good there it’s probbaly the bucking or maybe the Hop Up is on too much :P is check the nozzle.

April 26th, 2018, 05:44	#12
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	Nozzle? Rip in the bucking? How’s your selector switch? Is it tight? Weird as it sounds? I’ve gotten a gun that was like that. Maybe a little more sporadic but noticed the selector was tight. After upon examination I noticed whoever shimmed the gears had it tight and the selector plate was pushing on the bushing for the spur gear. Removed a shim and sanded down the selector plate for clearance and it solved the problem. If you’re getting decent contact though and it’s all good there it’s probbaly the bucking or maybe the Hop Up is on too much :P is check the nozzle. __________________ -Dangerous- BA Level 3 Certified Last edited by BobbyDangerous; April 26th, 2018 at 05:50..