AEG Issues
So I have a VFC KAC PDW AEG and I'm trying to modify it. It is shooting perfectly fine and everything, however I can't get it to stay at the desired FPS. I originally got it to shoot at the FPS I wanted (375 AVG) and used it for a couple weeks. After these couple weeks, I chromo'd it again and it was shooting 340 FPS AVG. I have no idea what to do for keeping the FPS at 375 AVG consistent, any opinions? (It was shooting 325FPS with an M110, then upgraded the piston head o ring to a silicon 70D o-ring, tappet plate sanding and notch in fin, and M120 and then that is how I got it to the 375 AVG, sealing before putting together was great)
Parts List:
Gate Titan
Tienly 30K motor
SHS Aluminum O Ring nozzle
SHS Double O Ring Cylinder Head (Teflon Taped & Sorbo + Neo)
SHS Ported Cylinder (Port roughly 3/4 or so)
SHS Ported Aluminum Piston Head (New 70D Silicon O Ring)
SHS Steel Tooth Piston
SHS 13:1 Gears (SS'd 2 teeth, Sector Delayer)
Guarder Tappet Plate (Front Sanded & Find Notched)
Guarder M120 Spring
VFC Bearing Spring Guide
ProWin Hop Up
Prommy Purple Flat Hop'd
Prommy Flat Nub
Prommy 6.03 275mm Barrel
Only thing I could assume would be the O ring, but I am not having any consistency issues, but then again I'm not a fancy tech. Also, maybe grease, but also could be a wrong assumption. Hoping someone could help me out.
__________________
WREAK HAVOC
|