Airsoft Canada - View Single Post - Need strong glue/adhesive for loose thread.

Ratters · March 12th, 2019, 10:15

Rainyeyes is right. mix up some jb weld or two part epoxy. use a toothpick or pin and apply it around the inside hole but be aware of the build up inside the hole when it dries because some of those brass threaded inserts are tubular and hollow. Adhesive will push up the centre and your bolt won't seat at the right height and once it dries your hooped. Cleaning out the goop is also a non starter once it's creeped up. Facepalm time :infantry:

March 12th, 2019, 10:15	#14
Ratters Trader rating Join Date: Jul 2003 Location: Vancouver	jb or epoxy Rainyeyes is right. mix up some jb weld or two part epoxy. use a toothpick or pin and apply it around the inside hole but be aware of the build up inside the hole when it dries because some of those brass threaded inserts are tubular and hollow. Adhesive will push up the centre and your bolt won't seat at the right height and once it dries your hooped. Cleaning out the goop is also a non starter once it's creeped up. Facepalm time :infantry: __________________ Can´t sleep. Clowns will eat me!