Quote:
Originally Posted by Wepeel
I installed a Nine Ball purple hop rubber and I ran into another issue.
Every time after the first shot, the hop will reset to 0. It doesn't matter what the wheel is set to, I look down the chamber after the first shot and no nub is protruding anymore.
I can still adjust the wheel and I can see the arm moving but it has no effect on the rubber. I have to disassemble and reassemble to get it working again only to have it disabled after the first shot again.
Any ideas?
EDIT: The stock rubber still works though.
|
Does the arm slip out of the adjustment channel in the wheel?
If this is the case, you might want to consider an upgraded steel arm, like the ILLusion Kinetics ones...