Airsoft Canada - View Single Post

rotorstart · December 28th, 2010, 16:29

I took the TM g36c out of the closet after almost 3 months, had the lipo charged, test fired in semi just fine. I switched to auto and immediately I started firing, the motor seemed to stop.

I cleaned the muzzle with some silicone oil, then disassembled the gun until the hand cover is off the motor unit. When I pull the trigger once, I can feel that the motor gets kicked once. If I pull it a few times, the connectors where the fuse is attached to, get real hot.

Can someone please give me some guidance how to troubleshoot this? Did the motor get toasted or the gear get jammed somewhere?

Thanks in advance.

December 28th, 2010, 16:29	#1
rotorstart Trader rating Join Date: Jul 2010	TM g36c motor stops firing I took the TM g36c out of the closet after almost 3 months, had the lipo charged, test fired in semi just fine. I switched to auto and immediately I started firing, the motor seemed to stop. I cleaned the muzzle with some silicone oil, then disassembled the gun until the hand cover is off the motor unit. When I pull the trigger once, I can feel that the motor gets kicked once. If I pull it a few times, the connectors where the fuse is attached to, get real hot. Can someone please give me some guidance how to troubleshoot this? Did the motor get toasted or the gear get jammed somewhere? Thanks in advance.