[BobbyDangerous]

Ever have this issue? I did. I would always hit the light and it would flicker or go dim. Here is why

There is a screw that holds a spring down in the back cap where you attach the pressure switch.

On that screw there is a wire soldered to it. Chances are, it's a cold solder. This has been bugging me for a long time. So I decided to figure out how I can dissect this thing.

In the back cap you can see that there is a ring that is holding everything in. There are 2 square cutouts you can see. Take an Small Tweaker (flathead) screw driver and stick it in one of the tiny squares and unscrew counter clockwise.

Re-tin the screw and the wire. Solder back together and boom!! Bright as ever.


I will post some pictures laters.