Airsoft Canada - View Single Post - Review: Mad Bull Black Python 6.03mm GBB tightbore x 4

Steve_U1S · April 30th, 2007, 00:09

I'm investigating further, but I've had an apparent failure with the G17/18 tighbore after roughly 400-500 rounds through - suddenly developed a stray shot problem that was not from contaminants, dirt, damaged hopup rubber (replaced to test that, too) etc.
Swapping back in the original inner barrel brought it back to previous spec.

This type of failure has apparently not been reported previously - suggesting that I possibly got a below-spec specimen (that did, however, group very well initially).
I'll continue to observe the other 3.

April 30th, 2007, 00:09	#2
Steve_U1S Trader rating Join Date: Jul 2006 Location: Toronto, Ontario	I'm investigating further, but I've had an apparent failure with the G17/18 tighbore after roughly 400-500 rounds through - suddenly developed a stray shot problem that was not from contaminants, dirt, damaged hopup rubber (replaced to test that, too) etc. Swapping back in the original inner barrel brought it back to previous spec. This type of failure has apparently not been reported previously - suggesting that I possibly got a below-spec specimen (that did, however, group very well initially). I'll continue to observe the other 3.