View Single Post
Old November 11th, 2013, 22:23   #5
Kos-Mos
 
Kos-Mos's Avatar
 
Join Date: Nov 2005
Location: LĂ©vis (QC)
Quote:
Originally Posted by ardo View Post
Sounds like almost a perfect match. Huge thanks for the link! Just ordered: came under $30CAD. I hope this one will last longer than the original 'pot metal' cr*p. Thanks again!


I mean the inner, adjustable part of the sight, the one held by the pin in front and by elevation screw at the back. On my sight all I have to do is drift the pin.
Yes, that is PART of the rear sight.
You can remove all of it (and be left with a dovetail in your slide) by removing the spring guide and barrel assemblies.
Then remove the socket screw at the rear of the slide, in the hammer cutout.
This should let you slide the whole blow back unit down and out of the slide, with the nozzle. Careful, there is a small spring between the BBU and the slide that you must not lose.

Then the rear sight just slides off to any side.
__________________
Quote:
Originally Posted by Drake View Post
Damnit, don't make me add "no discussing temporal paradoxes" to the rules or I'll go back in time and ban you last week.
Kos-Mos is offline   Reply With Quote