Airsoft Canada - View Single Post

Crunchmeister · March 1st, 2008, 18:19

Just an update on this thread:

I've had my Creation metal slide installed for almost a month now. I received the new stock TM slide assembly from Hellfire in early February and immediately proceeded to gut it and install the parts in the metal slide.

Since installing the metal slide, the slide lock has positively engaged every time. I've fired about 500 rounds using the same magazine I had used in the past (plus a second newer one), plus a lot of dry-firing to test if it would fail at all or the internals would show any wear like with the stock slide.

After all this firing, I see no signs of wear on the internal rail or in the slide catch notch.

March 1st, 2008, 18:19	#62
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Just an update on this thread: I've had my Creation metal slide installed for almost a month now. I received the new stock TM slide assembly from Hellfire in early February and immediately proceeded to gut it and install the parts in the metal slide. Since installing the metal slide, the slide lock has positively engaged every time. I've fired about 500 rounds using the same magazine I had used in the past (plus a second newer one), plus a lot of dry-firing to test if it would fail at all or the internals would show any wear like with the stock slide. After all this firing, I see no signs of wear on the internal rail or in the slide catch notch. __________________ Last edited by Crunchmeister; March 2nd, 2008 at 00:08..