Quote:
Originally Posted by lurkingknight
read my thread. I'm on hop up unit number 4.
put in a steel barrel, shred hop up units
leave the stock barrel, shred the barrel and then eventually the hop up unit.
shoot the outer barrel intact or not out the front of the gun.
Reinforcing the inner/outer slide will prevent it from cracking, that's about it.
I thought about drilling the outer and inner and pinning them together and just covering it all with paint and filler, but I haven't broken an outer slide yet.
Also while it's new, take out the screws holding the valve hammer assembly and properly loctite them in with something plastic safe, they will back out from vibration/usage and eventually tear themselves out of the frame and destroy the holes.
|
you got any pics for that screw problem?