Airsoft Canada - View Single Post

p.phresh · February 15th, 2013, 13:27

I'm building a TM 1911 from parts (I don't know why either, as it would have just been cheaper to buy new), and I'm having issues with the leaf spring not pushing the disconnector back up so I can pull the trigger and drop the hammer, and often I have to press the trigger twice, once to reset the disconnector and once to drop the hammer.

I've tried bending the right-most prong on the leaf spring to apply more pressure, and I still has this issue.

I've tried decreasing the pressure and it works less or not at all.

I'm not sure what else I can do to get this to work better, but I'd love some help or ideas on how to get this working flawlessly.

The lower is all TM parts aside from the main spring housing, which comes from a KJW MEU, but other then that it's all TM 1911 or Hi-Capa internals.

February 15th, 2013, 13:27	#1
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	1911/2011 leaf spring/diconnector help I'm building a TM 1911 from parts (I don't know why either, as it would have just been cheaper to buy new), and I'm having issues with the leaf spring not pushing the disconnector back up so I can pull the trigger and drop the hammer, and often I have to press the trigger twice, once to reset the disconnector and once to drop the hammer. I've tried bending the right-most prong on the leaf spring to apply more pressure, and I still has this issue. I've tried decreasing the pressure and it works less or not at all. I'm not sure what else I can do to get this to work better, but I'd love some help or ideas on how to get this working flawlessly. The lower is all TM parts aside from the main spring housing, which comes from a KJW MEU, but other then that it's all TM 1911 or Hi-Capa internals.