Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 183
Search took 0.60 seconds.
Search: Posts Made By: JohnnyDo
Forum: Airsoft Guns Discussion March 27th, 2007, 05:13
Replies: 18
Views: 11,945
Posted By JohnnyDo
good thing he knows a gun smith :)

good thing he knows a gun smith :)
Forum: Doctor's Corner March 19th, 2007, 23:25
Replies: 13
Views: 7,517
Posted By JohnnyDo
you have PM :)

you have PM :)
Forum: Accessories Discussion March 15th, 2007, 23:11
Replies: 11
Views: 8,573
Posted By JohnnyDo
sure, you know how to reach me. cheers

sure, you know how to reach me.

cheers
Forum: Doctor's Corner March 14th, 2007, 22:46
Replies: 10
Views: 5,050
Posted By JohnnyDo
it is also note worthy to say that using a...

it is also note worthy to say that using a lubricant during the tapping process will help make cleaner and more accurate threads, and don't forget to clean the lubricant before you use loctite to...
Forum: Doctor's Corner March 14th, 2007, 22:44
Replies: 10
Views: 4,914
Posted By JohnnyDo
as a note just to conclude this post: ...

as a note just to conclude this post:

Maximum charing current for batteries shoudl be the following:

NiCad = 3C
Nimh = 1C

C is the total capacity of the battery, so if you have a 1200mAh...
Forum: Doctor's Corner March 14th, 2007, 22:38
Replies: 6
Views: 4,046
Posted By JohnnyDo
message me on msnm (messenger) and with live chat...

message me on msnm (messenger) and with live chat I can try to give you a hand getting that gun to work.

jcronk [at] canadianairsoftsupply.com

cheers,

john
Forum: Accessories Discussion March 14th, 2007, 22:22
Replies: 11
Views: 8,573
Posted By JohnnyDo
you could of course build the battery pack above...

you could of course build the battery pack above for less then ordering it speical from Asia. I know you can get redy made 7.2v batteyr packs here fro R/C cars in NiCad and Nimh configurations for...
Forum: Doctor's Corner March 13th, 2007, 00:21
Replies: 10
Views: 5,050
Posted By JohnnyDo
for sure, good job on getting it fixed and glad...

for sure, good job on getting it fixed and glad to give you a helping hand.

cheers
Forum: Doctor's Corner March 11th, 2007, 18:01
Replies: 10
Views: 5,050
Posted By JohnnyDo
don't forget to use a good high strength thread...

don't forget to use a good high strength thread locker. If you don't the screw could vibrate free. I use Loctite Red and never had any problems with it and have done a good dozzen mechbox's this way....
Forum: Upgrades & Modifications November 15th, 2006, 01:13
Replies: 9
Views: 7,047
Posted By JohnnyDo
I have wired a gun custom for a guy with 16awg...

I have wired a gun custom for a guy with 16awg wire and allowing the use of a battery Front OR Back :) This was certainly a job and a half to do as any of you experianced guys will wonder how the...
Forum: General October 29th, 2006, 06:19
Replies: 10
Views: 6,881
Posted By JohnnyDo
yep .. HoJo has got to get that fixed for sure....

yep .. HoJo has got to get that fixed for sure. Also putting a link in the user profile to our feedback would be a big help. Even a custom field or two that we can put whatever links or text in that...
Forum: Doctor's Corner October 28th, 2006, 15:24
Replies: 9
Views: 5,327
Posted By JohnnyDo
I've purchased presure switches where teh wires...

I've purchased presure switches where teh wires soldered the tail cap have broken free. It was really as simple as re-soldering the wires back to the spring etc and all was good. In your case, it...
Forum: Doctor's Corner October 26th, 2006, 21:27
Replies: 5
Views: 8,261
Posted By JohnnyDo
that's the same set I have and it works great. I...

that's the same set I have and it works great. I do recoemdn that you don't use a wash (with the hole in it) under the motor while you hammer on thepinion as you really want to supporet the shaft. If...
Forum: Upgrades & Modifications October 15th, 2006, 00:48
Replies: 2
Views: 3,161
Posted By JohnnyDo
outside diameter is 0.336" (8.54mm) ...

outside diameter is 0.336" (8.54mm)

cheers
Forum: Doctor's Corner October 9th, 2006, 03:34
Replies: 4
Views: 3,105
Posted By JohnnyDo
- strip mag down - clean with alcohol - grind...

- strip mag down
- clean with alcohol
- grind inside part of mag where seal sits with a dremel stone
- grind bottom part of mag where seal sits with same stone
- clean and dry with alcohol and...
Forum: Doctor's Corner October 7th, 2006, 00:22
Replies: 12
Views: 6,723
Posted By JohnnyDo
- rocket valve .. get a firefly valve which is...

- rocket valve .. get a firefly valve which is stainless steel I think, the stock ones are common to breaking
- both sears (part no . 267 and 266)
- hammer no. 263
- fireing pin no.78 and spring...
Forum: Movies/Video Games/Sci-fi October 6th, 2006, 10:09
Replies: 27
Views: 27,705
Posted By JohnnyDo
or it would make for a much shorter movie....

or it would make for a much shorter movie. although it would make a really really cool scene and they'd still be alive, but i think it's like the same thing in horror movies where the girl runs away,...
Forum: Doctor's Corner October 6th, 2006, 10:04
Replies: 12
Views: 6,723
Posted By JohnnyDo
I'm saying that once you replace the broken full...

I'm saying that once you replace the broken full auto sear (part 267), and the hammer still sticks up too much and binds against the slide the next step is to look at the hammer.
Forum: Doctor's Corner October 6th, 2006, 05:00
Replies: 12
Views: 6,723
Posted By JohnnyDo
On average, I have found if the gun has been used...

On average, I have found if the gun has been used enough to have that part break; is the hammer itself can be worn enough on the notches on the it's side that the sear hold on to that the hammer is...
Forum: Upgrades & Modifications October 3rd, 2006, 00:12
Replies: 7
Views: 5,165
Posted By JohnnyDo
So very true, I have stripped a couple pistons...

So very true, I have stripped a couple pistons before I releized I needed a stronger spring to push the piston back into battery before the sector gear enguaged the piston again. *sigh* not to...
Forum: Upgrades & Modifications September 28th, 2006, 23:09
Replies: 5
Views: 4,815
Posted By JohnnyDo
can you guys post the solution to this please?

can you guys post the solution to this please?
Forum: Doctor's Corner September 28th, 2006, 23:05
Replies: 17
Views: 7,723
Posted By JohnnyDo
personally I have seen another ICS ak47 with the...

personally I have seen another ICS ak47 with the exact same problem. far as I could tell the gun was bone stock, shim job was loose not over tight and the motor alignment was fairly good. Personally...
Forum: Doctor's Corner September 26th, 2006, 23:04
Replies: 1
Views: 3,072
Posted By JohnnyDo
it's probably the safety lever inside the...

it's probably the safety lever inside the mechbox. When you select safe via the selector switch, the selector plate pushes a lever connected to another lever inside the mechbox that intersects the...
Forum: Doctor's Corner September 26th, 2006, 14:16
Replies: 5
Views: 3,768
Posted By JohnnyDo
I have had alot of success in fixing the broken...

I have had alot of success in fixing the broken tab. I have done this by doing the following:
- get a small peice of music wire or brass stock and matching drill bit. This should be around 1/64 -...
Forum: Doctor's Corner September 19th, 2006, 22:50
Replies: 14
Views: 6,537
Posted By JohnnyDo
you may want to test things out a bit more before...

you may want to test things out a bit more before you go on to buy another battery. It could be your switch, wires inside the gun going to the motor, bas solder joint of the wires attached to the...
Forum: Doctor's Corner September 19th, 2006, 22:48
Replies: 31
Views: 15,845
Posted By JohnnyDo
any decent dollar store will have it or any drug...

any decent dollar store will have it or any drug store, or store with a drug section. it's pretty much a basic medical supply staple so you can pick it up anywhere short of the local gas station.
Forum: Doctor's Corner September 19th, 2006, 20:38
Replies: 31
Views: 15,845
Posted By JohnnyDo
if it's only 70% on the label then that's...

if it's only 70% on the label then that's probalby what he was useing.
Forum: Doctor's Corner September 18th, 2006, 02:57
Replies: 31
Views: 15,845
Posted By JohnnyDo
my guess is it's just more pourous then other...

my guess is it's just more pourous then other rubber such as that which is used for o-rings etc. But even then o-rings sweel with enough silicon oil and time. I'm sure Carl has a much more technical...
Forum: Doctor's Corner September 18th, 2006, 02:34
Replies: 3
Views: 4,171
Posted By JohnnyDo
hunt me down on MSNM and I'll try to help you...

hunt me down on MSNM and I'll try to help you live and in color !! Then we can post the fix on here for all to read.
Forum: Doctor's Corner September 18th, 2006, 02:28
Replies: 31
Views: 15,845
Posted By JohnnyDo
most excellent. I'll be doing mine this weekend...

most excellent. I'll be doing mine this weekend (glock hopup) and i'll post my results. From the sounds of it this is the perfect solution.

And of equal note, if you have a rubber peice of...
Forum: Doctor's Corner September 18th, 2006, 00:22
Replies: 31
Views: 15,845
Posted By JohnnyDo
Wow, I wouldn't have thought of that either....

Wow, I wouldn't have thought of that either. Thanks for the tip. I guess it stands to reason as alcohol will dry out and take the natural lubricants out of rubber but I never thought it would do so...
Forum: Doctor's Corner September 16th, 2006, 17:56
Replies: 5
Views: 5,476
Posted By JohnnyDo
you may find it helps if you drill the diimple in...

you may find it helps if you drill the diimple in the top metal assembly where the bearing sits a little bit deeper. I'm talking a "very little" bit deeper as sometimes the molding process does not...
Forum: Doctor's Corner September 16th, 2006, 17:52
Replies: 5
Views: 3,987
Posted By JohnnyDo
the size of allen key you need is 0.9mm

the size of allen key you need is 0.9mm
Forum: Doctor's Corner September 16th, 2006, 17:25
Replies: 3
Views: 4,171
Posted By JohnnyDo
when you move the expansion chamber (the nozzel)...

when you move the expansion chamber (the nozzel) back and forth with your finger does it move freely? Does it catch or bind when you start to move it, near the end of it's movement, only when you...
Forum: Doctor's Corner September 16th, 2006, 17:19
Replies: 7
Views: 4,469
Posted By JohnnyDo
When you did your upgrades, did you remove the...

When you did your upgrades, did you remove the trigger assembly or the rear lower assembly (the part that holds the hammer)? as if you did and bent your trigger bar that will cause binding and...
Forum: Accessories Discussion September 15th, 2006, 22:55
Replies: 10
Views: 5,448
Posted By JohnnyDo
NiMh batteries work more optimally if you do NOT...

NiMh batteries work more optimally if you do NOT discharge them after each use. It is recommended to cycle them periodically (for the average airsofter this can be once every couple of months. to...
Forum: Airsoft Guns Discussion September 12th, 2006, 03:52
Replies: 13
Views: 7,829
Posted By JohnnyDo
agreed. If you have to ask for help on taking...

agreed. If you have to ask for help on taking apart a mech box .. get a clear garbage bag and open the mechbox well inside the mag and on teh floow where you have lot of room. Things will fly out and...
Forum: Accessories Discussion September 12th, 2006, 03:45
Replies: 92
Sticky: Battery FAQ
Views: 421,256
Posted By JohnnyDo
those are in " mm "

those are in " mm "
Forum: Doctor's Corner September 10th, 2006, 15:38
Replies: 4
Views: 3,987
Posted By JohnnyDo
I just used my digital calipers on the hopup...

I just used my digital calipers on the hopup bearing and it uses a ball bearing of the following size:

1.97mm (0.0775")

So any 2mm ball bearing will work just fine. If you need help locating...
Forum: Doctor's Corner September 9th, 2006, 16:06
Replies: 2
Views: 4,252
Posted By JohnnyDo
try to fire the gun while holding the mag battom...

try to fire the gun while holding the mag battom with your other hand. It could be a sealing problem between the mag and the expansion chamber. If this solves the problem then you need a new mag...
Forum: Doctor's Corner September 5th, 2006, 22:47
Replies: 7
Views: 4,057
Posted By JohnnyDo
same ... I just had to file some molding flash or...

same ... I just had to file some molding flash or the burr left when they cut the wire then it fit just fine.
Forum: Doctor's Corner August 31st, 2006, 23:23
Replies: 6
Views: 11,734
Posted By JohnnyDo
my personal experianc with the m14 mechbox is...

my personal experianc with the m14 mechbox is it's the same as any other .. just a different size/shape. i will note that I found the anti-reversal latch more of a bi**** to install then other ver2...
Forum: Gear Discussion August 30th, 2006, 02:39
Replies: 31
Views: 18,139
Posted By JohnnyDo
1 cup water 1 cup viniger - pour in bladder ...

1 cup water
1 cup viniger
- pour in bladder
- swish around for 5 minutes
- throw in fridge for 30 minutes
- swish around for 5 minutes
- empty
- rinse with water

Done !! I use viniger and...
Forum: Upgrades & Modifications August 23rd, 2006, 21:11
Replies: 29
Views: 12,187
Posted By JohnnyDo
Thanks for the info, I guess it makes sense they...

Thanks for the info, I guess it makes sense they would offer it then as they also sell mechbox's as replacements so a user can get the added recoil effect and loud "bang bang" noise from their gun...
Forum: Upgrades & Modifications August 23rd, 2006, 03:58
Replies: 29
Views: 12,187
Posted By JohnnyDo
I totally agree from recent experience. An...

I totally agree from recent experience. An aluminum piston and piston head can cause all sorts of problems.

To be honest I have yet to see anything documented or made into a theory as to why...
Forum: Gas Gun Solutions August 23rd, 2006, 03:53
Replies: 5
Views: 24,489
Posted By JohnnyDo
Thanks for the props man, anything I can do to...

Thanks for the props man, anything I can do to help as many have done for me.
Forum: Upgrades & Modifications August 23rd, 2006, 00:03
Replies: 29
Views: 12,187
Posted By JohnnyDo
Another option to talk about sitting down at the...

Another option to talk about sitting down at the camp fire is getting a FTK from guarder. They include pretty much every component that can be upgrades inside the mechbox and comes with Super-Lube...
Forum: AEG Solutions August 2nd, 2006, 22:48
Replies: 15
Views: 49,443
Posted By JohnnyDo
Just wanted to say that it was a very well...

Just wanted to say that it was a very well written guide/explanation on how that mechanisim works. Good job man !!!
Forum: Doctor's Corner August 2nd, 2006, 01:18
Replies: 20
Views: 7,672
Posted By JohnnyDo
it's hard to be 100% sure but it looks like the...

it's hard to be 100% sure but it looks like the spring on the tappet plate and switch contact are both upside down. this will cause the switch to sometimes stick and the tappet plate spring to...
Forum: General July 30th, 2006, 13:25
Replies: 21
Views: 9,379
Posted By JohnnyDo
This is why good communication is key when making...

This is why good communication is key when making a deal. Although there are times shit does happen and you need to back out of a deal, the person who is trying to buy your items should communicate...
Showing results 1 to 50 of 183

 
Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 08:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.