Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 213
Search took 0.11 seconds.
Search: Posts Made By: Zfurlong
Forum: Upgrades & Modifications March 19th, 2023, 18:17
Replies: 3
Views: 14,638
Posted By Zfurlong
My stock kwc 1911 with .3's is an absolute...

My stock kwc 1911 with .3's is an absolute monster.
What drakker said, test with different weights, adjust hop, get it where you like it, then debate upgrades from there
Forum: Upgrades & Modifications December 12th, 2022, 09:35
Replies: 1
Views: 2,954
Posted By Zfurlong
Lots of folks do this, basically, take out the...

Lots of folks do this, basically, take out the guts, tape off any crevices you don't want paint getting into, and fire away. (There are quite a few guides on the old tube to follow if you don't know...
Forum: Upgrades & Modifications February 23rd, 2022, 16:23
Replies: 2
Views: 4,930
Posted By Zfurlong
If you aren't looking to break the bank, then you...

If you aren't looking to break the bank, then you shouldn't be using an mg, let alone an hpa one.
But that aside, Daytona is costly, offers recoil and is a pig when it comes to air usage....
Forum: Newbie Tank November 1st, 2021, 01:54
Replies: 4
Views: 4,483
Posted By Zfurlong
I should note, I've played in three provinces as...

I should note, I've played in three provinces as well as multiple locations in the states, many years ago as well
Forum: Newbie Tank November 1st, 2021, 01:53
Replies: 4
Views: 4,483
Posted By Zfurlong
If you are in Toronto, about an hour north in...

If you are in Toronto, about an hour north in Wasaga beach is one of the best outdoor fields I've played at, with great community support behind it as well. Was posted to Borden for around 2 years,...
Forum: Airsoft Guns Discussion September 12th, 2021, 00:48
Replies: 3
Views: 3,887
Posted By Zfurlong
G&g is the best bang for your buck if you don't...

G&g is the best bang for your buck if you don't intend on upgrading it at all. Cyma is a rebrand of TM spec or reasonably close at least. A&k I am only familiar with as I have a 249 from them that is...
Forum: Upgrades & Modifications September 12th, 2021, 00:38
Replies: 1
Views: 5,383
Posted By Zfurlong
My guess would be it's the size of the bucking....

My guess would be it's the size of the bucking. Try reverting to the old bucking with all other new parts and try that. If still nothing, old barrel, new bucking, new parts, continue in that fashion...
Forum: Airsoft Guns Discussion September 12th, 2021, 00:34
Replies: 1
Views: 2,997
Posted By Zfurlong
Green gas and CO2 are at vastly different...

Green gas and CO2 are at vastly different pressures. GG is typically around 120 psi whereas CO2 is around the 7-900 mark. You run the risk of blowing your rifle apart in your face.
Forum: Doctor's Corner September 4th, 2021, 18:23
Replies: 8
Views: 5,903
Posted By Zfurlong
Please for god sake, don't fucking take the gun...

Please for god sake, don't fucking take the gun to work unless you work at a paintball/airsoft shop or actual firearms store. Use common sense man. If the wrong person sees it, cops get called, media...
Forum: General May 14th, 2021, 20:19
Replies: 95
Views: 187,236
Posted By Zfurlong
It's been almost two years, I'm still waiting on...

It's been almost two years, I'm still waiting on a few hop rubbers that was part of a bigger order. ( I gave up hope long ago)
Forum: Doctor's Corner May 5th, 2021, 01:29
Replies: 2
Views: 3,347
Posted By Zfurlong
If you don't run a LiPo battery already, get one....

If you don't run a LiPo battery already, get one. A 7.4 will work in any gun, 11.1's are my general go-to. Check your motor height to see if it is causing too much pressure on the gears to the point...
Forum: Doctor's Corner May 5th, 2021, 01:22
Replies: 5
Views: 6,439
Posted By Zfurlong
If you have a friend who knows their way around a...

If you have a friend who knows their way around a 3d printer, have them do up the files and print one for you.
If you don't have a friend like that, find someone who is good with that stuff and...
Forum: Upgrades & Modifications May 5th, 2021, 01:20
Replies: 13
Views: 10,776
Posted By Zfurlong
The internals like spring, guide and all that...

The internals like spring, guide and all that jazz can be legally imported without issue from almost any source. Evike (as much as I hate dealing with them), tend to carry parts compatible with most...
Forum: Upgrades & Modifications April 20th, 2021, 21:32
Replies: 13
Views: 10,776
Posted By Zfurlong
Only reason I mentioned the lapping of the barrel...

Only reason I mentioned the lapping of the barrel is due to the wide variety of inners I have seen people swear by over the years that turn out to be nothing more than overpriced junk (in terms of QC...
Forum: Upgrades & Modifications April 20th, 2021, 09:00
Replies: 13
Views: 10,776
Posted By Zfurlong
The first thing I would look into acquiring is a...

The first thing I would look into acquiring is a 90 degree dear set (trigger sear as well as 90 degree piston), to ensure longevity of the sear without having to worry about slam firing issues...
Forum: Upgrades & Modifications April 12th, 2021, 23:08
Replies: 3
Views: 6,182
Posted By Zfurlong
Lrb-long range barrel mod, drilling the outer and...

Lrb-long range barrel mod, drilling the outer and using screws to cause the inner barrel to bend just ever so slightly in a given way so the BB rides along the top of the inner barrel.
Er-hop -...
Forum: Gear Discussion April 12th, 2021, 10:46
Replies: 10
Views: 10,218
Posted By Zfurlong
I'll echo what chiefy said about the fans. You...

I'll echo what chiefy said about the fans. You just need to play with it until you find a mounting style that works for you. Friend of mine out west attached his under the lip of his bump helmet and...
Forum: Upgrades & Modifications April 12th, 2021, 10:43
Replies: 13
Views: 10,776
Posted By Zfurlong
The well mb4410 has a rather flushed out thread...

The well mb4410 has a rather flushed out thread for upgrades on airsoftsniperforum that may be worth your while looking into
Forum: Upgrades & Modifications March 30th, 2021, 21:38
Replies: 3
Views: 6,182
Posted By Zfurlong
It's been years since I've had one, but based on...

It's been years since I've had one, but based on memory, the most reliable method was a combination of the old school LRB mod with er-hop and TDC
Forum: General February 8th, 2021, 22:06
Replies: 8
Views: 10,680
Posted By Zfurlong
use it till it breaks as the saying goes. i have...

use it till it breaks as the saying goes. i have a vfc mp5 and a vfc hk 417. the mp5, i have swapped the hop rubber and nub in from stock mound style to v-type rubber, gearbox internals are stock,...
Forum: Upgrades & Modifications February 1st, 2021, 22:21
Replies: 1
Views: 22,509
Posted By Zfurlong
it should be able to be loosened off a small...

it should be able to be loosened off a small amount to the point where it should be able to be used. (i did the same thing with we g17/18 mags for a tm gun and vice versa) it takes some finessing to...
Forum: Upgrades & Modifications February 1st, 2021, 22:16
Replies: 1
Views: 18,517
Posted By Zfurlong
most v2 parts will work just fine. its all a...

most v2 parts will work just fine. its all a matter of how you tune it (think putting a new motor/parts into your car, it will take time and use for them to wear in properly)
Forum: Upgrades & Modifications February 1st, 2021, 22:13
Replies: 1
Views: 19,301
Posted By Zfurlong
if it actually is made by kwc, i dont see it...

if it actually is made by kwc, i dont see it being an issue with aftermarket gbb/vsr buckings
Forum: Upgrades & Modifications January 25th, 2021, 13:43
Replies: 2
Views: 6,903
Posted By Zfurlong
really any piston should be fine as long as it...

really any piston should be fine as long as it has a metal rack, for piston head and cylinder head, you will want ones with double o-ring. as for cylinder, cant really go wrong with a non ported, as...
Forum: Airsoft Guns Discussion January 11th, 2021, 21:09
Replies: 4
Views: 6,670
Posted By Zfurlong
i replied to your other thread about this

i replied to your other thread about this
Forum: Newbie Tank January 11th, 2021, 20:52
Replies: 4
Views: 9,404
Posted By Zfurlong
basically if the brand that sells the bbs you are...

basically if the brand that sells the bbs you are looking at has a 90% stock of guns that are clear plastic, under 100$, or can be found at walmart, crappy tire, etc. dont buy them. if a brand sells...
Forum: Newbie Tank January 11th, 2021, 20:45
Replies: 1
Views: 5,430
Posted By Zfurlong
its not immediate verification. you will need to...

its not immediate verification. you will need to either contact a few reps local to you (be prepared to drive an hour or more in some cases) to meet them. you will normally come accross members who...
Forum: Newbie Tank January 11th, 2021, 20:35
Replies: 1
Views: 4,120
Posted By Zfurlong
the most likely issue is the part of the cylinder...

the most likely issue is the part of the cylinder that engages with the little metal clip that actually rotates the cylinder is to worn (the issue arises from either constant spinning of the cylinder...
Forum: Doctor's Corner January 2nd, 2021, 18:52
Replies: 1
Views: 9,915
Posted By Zfurlong
head to kent building supply, talk to one of the...

head to kent building supply, talk to one of the employees, see if they have a cut shop. if they do, bring the parts there and have them make the cuts for you (at most will cost like 10$) that will...
Forum: Accessories Discussion December 31st, 2020, 05:51
Replies: 1
Views: 8,600
Posted By Zfurlong
your est bet would likely be to contact a...

your est bet would likely be to contact a retailer (a reputable one), and have the place a special order for you as they would most likely have the appropriate licenses in order to get the parts, if...
Forum: Airsoft Guns Discussion December 31st, 2020, 05:33
Replies: 8
Views: 9,625
Posted By Zfurlong
for co2, in order to hold up in cold weather and...

for co2, in order to hold up in cold weather and to avoid having to have the mag cooldown, i would second the kwc 1911. i have had mine as a workhorse for going on 5 years now, never had issues...
Forum: Doctor's Corner December 31st, 2020, 05:12
Replies: 1
Views: 8,460
Posted By Zfurlong
best bet, contact a tech local to you and have...

best bet, contact a tech local to you and have them install a fet directly inside your gun. (estimated cost, anywhere from 10-50 depending on tech fee)
Forum: Upgrades & Modifications December 31st, 2020, 05:10
Replies: 2
Views: 5,002
Posted By Zfurlong
didnt have the ics spring release, but i have had...

didnt have the ics spring release, but i have had the release system on another brand (cant remember which one offhand, might have been a g&g one, but again, idk offhand, was years ago), for the most...
Forum: Upgrades & Modifications December 31st, 2020, 05:02
Replies: 2
Views: 7,312
Posted By Zfurlong
first and foremost you will need to set a budget...

first and foremost you will need to set a budget as prices can widely vary. as for upgrades, start with your hop up. after your hop, you will then need to look at airseal.

most expensive:
shs or...
Forum: General July 5th, 2020, 21:06
Replies: 11
Views: 25,555
Posted By Zfurlong
pretty much anything by kwc should suit your...

pretty much anything by kwc should suit your needs. the g17, 1911, p226x5, and cz75 are all decent enough i have owned those 4 and have yet to have one die on me. the 226 is running on 8 years now,...
Forum: Upgrades & Modifications March 27th, 2020, 09:44
Replies: 2
Views: 18,654
Posted By Zfurlong
Reference import laws, but generally it's usually...

Reference import laws, but generally it's usually dependant on the mood of the CBSA agent on duty that day. There has always been this issue with CBSA not being very familiar with the exact laws of...
Forum: Doctor's Corner March 27th, 2020, 09:38
Replies: 2
Views: 20,839
Posted By Zfurlong
One other possibility is that you reversed the...

One other possibility is that you reversed the wires when resoldering by mistake
Forum: Doctor's Corner March 27th, 2020, 09:37
Replies: 2
Views: 20,839
Posted By Zfurlong
It's possible either too high or too low of a...

It's possible either too high or too low of a voltage battery or mah or max draw rating, or wrong type of battery (I had a similar issue with a titan MOSFET while using an 11.1v LiPo, which was...
Forum: Accessories Discussion March 23rd, 2020, 09:41
Replies: 6
Views: 27,450
Posted By Zfurlong
Honestly, I would recommend getting LiPo...

Honestly, I would recommend getting LiPo batteries for your guns, but if you are set on your venom, swap the connectors on your gun and battery to dean's connectors, as well as your RC model, or if...
Forum: Airsoft Guns Discussion March 23rd, 2020, 09:33
Replies: 4
Views: 14,245
Posted By Zfurlong
There are a few possibilities, with the first...

There are a few possibilities, with the first being arcing between your trigger contacts. Your p90 should be a 2 stage trigger when set to full auto, with a partial squeeze being semi and full...
Forum: Doctor's Corner December 13th, 2019, 00:12
Replies: 1
Views: 17,019
Posted By Zfurlong
It likely is metal. But if you are still worried,...

It likely is metal. But if you are still worried, use a drill tip instead of a cutting tip and then break the orange plastic off in sections that way.
To be more specific, use the drill bit to make...
Forum: Doctor's Corner November 30th, 2019, 01:16
Replies: 2
Views: 18,521
Posted By Zfurlong
It's possible the winding mechanism in the drum...

It's possible the winding mechanism in the drum mag is too strong, I would recommend leaving the winding mech fully compressed for a day or two to settle in (break in), another possibility is that...
Forum: Doctor's Corner March 16th, 2019, 02:39
Replies: 2
Views: 5,764
Posted By Zfurlong
get a complete sear set swap to a 90 degree one,...

get a complete sear set swap to a 90 degree one, then get the appropriate 90 degree piston as well (have owned both the spr as well as jg bar10)
Forum: Upgrades & Modifications January 11th, 2019, 10:41
Replies: 5
Views: 11,623
Posted By Zfurlong
1 - possibly, however not necessary. I have an...

1 - possibly, however not necessary. I have an echo1 ak that clocks in at 320 fps on .2's. and when I use .3's in game I'm reaching 220 feet with it
2 - yeah a 120 is roughly 400-410 depending on...
Forum: Doctor's Corner December 9th, 2018, 21:37
Replies: 9
Views: 11,653
Posted By Zfurlong
believe it or not, however every m14 ive done...

believe it or not, however every m14 ive done work on has had that issue after replacing the stock rubber. the lips on the stock rubbers from what ive found are just a hair too long causing them to...
Forum: Airsoft Guns Discussion December 3rd, 2018, 10:44
Replies: 9
Views: 11,812
Posted By Zfurlong
It certainly is a niche rifle. I have one, its...

It certainly is a niche rifle. I have one, its size definitely is a plus for me being a smaller guy, in addition to using more of an agile speed based play style. The stock 90 degree sears is a...
Forum: Upgrades & Modifications December 3rd, 2018, 10:40
Replies: 1
Views: 7,554
Posted By Zfurlong
Your best bet is to scratch build, that way you...

Your best bet is to scratch build, that way you get what you want from the get-go rather than buying and upgrading later
Forum: Airsoft Guns Discussion November 19th, 2018, 14:40
Replies: 9
Views: 11,812
Posted By Zfurlong
might be a good niche rifle, for those who play...

might be a good niche rifle, for those who play on cqb fields if tuned and dialed in right, with the right bbs should be able to put shots into all the small nooks and cranies, I'm interested
Forum: Upgrades & Modifications November 19th, 2018, 14:34
Replies: 6
Views: 10,155
Posted By Zfurlong
basic upgrades: barrel, hop bucking+nub, stock...

basic upgrades: barrel, hop bucking+nub, stock unit should be fine as its already mated to the body, lipo battery, mosfet, shimjob and correct aoe.
Forum: Airsoft Guns Discussion October 25th, 2018, 14:35
Replies: 36
Views: 32,942
Posted By Zfurlong
lmfao, I have both m4 and ak platform, however I...

lmfao, I have both m4 and ak platform, however I only use the regular mags for each. only threw out the idea as it is something I have seen a few guys use over the years. I personally prefer the...
Showing results 1 to 50 of 213

 
Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 12:00.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.