Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 500
Search took 0.47 seconds.
Search: Posts Made By: Drakker
Forum: Airsoft Guns Discussion November 24th, 2020, 22:20
Replies: 4
Views: 637
Posted By Drakker
Not my experience, I keep seeing people with...

Not my experience, I keep seeing people with broken ones, or they just don't work well at all.
Forum: Airsoft Guns Discussion November 24th, 2020, 09:48
Replies: 4
Views: 637
Posted By Drakker
Frankly, except the Tokyo Marui Hi-Capa, those...

Frankly, except the Tokyo Marui Hi-Capa, those are all poor choices. The KWA 1911 is a meh performer, not a bad gun, but you can do better. The Elite Force 1911 will break quite quickly, although...
Forum: Airsoft Guns Discussion November 11th, 2020, 12:29
Replies: 2
Views: 574
Posted By Drakker
Permatex multi-purpose synthetic grease is pretty...

Permatex multi-purpose synthetic grease is pretty much the same thing as Super Lube, so that works too if your local hardware store doesn't carry Super Lube.
Forum: General November 10th, 2020, 10:53
Replies: 6
Views: 933
Posted By Drakker
It's mostly the fact that in the past, the vast,...

It's mostly the fact that in the past, the vast, vast, vast majority of cheaters and players with bad behavior were coming from speedball. When you are playing for fun, realism and even re-enactment,...
Forum: Upgrades & Modifications October 8th, 2020, 10:09
Replies: 6
Views: 3,078
Posted By Drakker
Yeah, Madbulls are great, well, the more...

Yeah, Madbulls are great, well, the more expensive ones, they have match and precision grades, I always forget which one is the best, so confusing. The other ones are ok, nothing spectacular, but...
Forum: Upgrades & Modifications October 7th, 2020, 17:03
Replies: 6
Views: 3,078
Posted By Drakker
Ok, that green rubber/bucking is not the most...

Ok, that green rubber/bucking is not the most accurate, nor is it the best at lifting heavy BBs, but it is an excellent rubber for cold resistance, it works very well in winter. You should be good...
Forum: Upgrades & Modifications October 7th, 2020, 12:18
Replies: 6
Views: 3,078
Posted By Drakker
Range an accuracy can probably be fixed by a...

Range an accuracy can probably be fixed by a simple hop-up rubber swap. G&G uses notoriously bad hop-up rubbers in their lower end products. Also, disassembling, cleaning and greasing an AEG will not...
Forum: Upgrades & Modifications October 4th, 2020, 20:06
Replies: 5
Views: 2,427
Posted By Drakker
If their compression is still good and their...

If their compression is still good and their output power is stable, all you'd need to be competitive is probably a new hop-up rubber that can easily lift heavier BBs. The price of heavy BBs fell...
Forum: General September 23rd, 2020, 16:22
Replies: 4
Views: 1,724
Posted By Drakker
There's lovers and haters for all GBBR platforms....

There's lovers and haters for all GBBR platforms. My opinion? KWA GBBRs are underwhelming, and the material they use for the bodies aren't the best. With that said, their GBB SMGs like their MP9 and...
Forum: Upgrades & Modifications September 22nd, 2020, 10:30
Replies: 4
Views: 1,451
Posted By Drakker
They are shims you use for gears in AEGs. But...

They are shims you use for gears in AEGs. But some companies produce them commercially as power reducing discs for GBBRs.

Here are the ones from FG-Airsoft, but they are not the only company...
Forum: Upgrades & Modifications September 21st, 2020, 22:57
Replies: 4
Views: 1,451
Posted By Drakker
A much simpler fix than an npas would be putting...

A much simpler fix than an npas would be putting an AEG shim in the front of your nozzle before the rocket valve. It took my WE AK PMC from 420 FPS to around 350fps with 0.20g, which is perfect for...
Forum: Newbie Tank September 19th, 2020, 15:57
Replies: 2
Views: 804
Posted By Drakker
A lot of fields are strictly 18+, and most that...

A lot of fields are strictly 18+, and most that accept minors are 16+, so the biggest challenge I see is finding a field that will allow you to play with your son.

But best tips are, don't cheap...
Forum: Airsoft Guns Discussion September 16th, 2020, 08:33
Replies: 5
Views: 3,362
Posted By Drakker
The accuracy and range of this gun out of the box...

The accuracy and range of this gun out of the box is totally amazing. It also works rather well in the cold if you don't fire too fast. Being almost totally silent helps in a lot of situations.
...
Forum: General September 14th, 2020, 14:55
Replies: 10
Views: 6,901
Posted By Drakker
As BioRage says, if you want CO2, look for the...

As BioRage says, if you want CO2, look for the ASG / KJW CZ P09, great little pistols, and spare parts are very easy to acquire and quite cheap.

I personally wouldn't use a KWC even for plinking....
Forum: Airsoft Guns Discussion September 2nd, 2020, 16:01
Replies: 23
Views: 7,328
Posted By Drakker
It would be nice if the site owner was actively...

It would be nice if the site owner was actively part of the community... just sayin'...
Forum: Airsoft Guns Discussion September 1st, 2020, 18:09
Replies: 23
Views: 7,328
Posted By Drakker
Doesn't help that Facebook censors links to...

Doesn't help that Facebook censors links to airsoftcanada.com. You have to mangle the domain name to post links, and tell people to fix it when copy pasting it.
Forum: General April 24th, 2020, 22:36
Replies: 12
Views: 5,538
Posted By Drakker
Same here.

Same here.
Forum: General March 2nd, 2020, 11:03
Replies: 7
Views: 8,111
Posted By Drakker
Its been that way for me too. Been going on for...

Its been that way for me too. Been going on for months if not more than a year.
Forum: Airsoft Guns Discussion December 25th, 2019, 10:28
Replies: 8
Views: 6,373
Posted By Drakker
Don't restrict yourself to AEGs. Time to build a...

Don't restrict yourself to AEGs. Time to build a nifty hi-capa GBB!
Forum: General December 19th, 2019, 22:09
Replies: 83
Views: 29,791
Posted By Drakker
I don't know him much, he attended games I...

I don't know him much, he attended games I organized. As I said, he was a nice guy to hang out with, but I never kept contact with him. I sent PMs to the guy that introduced him to me, no idea if he...
Forum: General December 18th, 2019, 11:25
Replies: 83
Views: 29,791
Posted By Drakker
I met him a few years back when he spent some...

I met him a few years back when he spent some time in Montreal. He was a nice guy and we had a lot of fun with him at our target shooting nights. I'll try to get in touch with other local players...
Forum: Upgrades & Modifications December 9th, 2019, 07:11
Replies: 14
Views: 11,534
Posted By Drakker
That kit is supposed to bring the power around...

That kit is supposed to bring the power around 500 fps with 0.2g... It pierced both sides, that sounds about right.
Forum: Upgrades & Modifications December 8th, 2019, 21:48
Replies: 14
Views: 11,534
Posted By Drakker
The reviews for this kit are all very good. It's...

The reviews for this kit are all very good. It's great to see close up pics, if you have a chrono, check your shot variance before and after the install. For a stock rifle the shot to shot variance...
Forum: Upgrades & Modifications November 20th, 2019, 19:41
Replies: 14
Views: 11,534
Posted By Drakker
So I finally got around to open it up. The hop-up...

So I finally got around to open it up. The hop-up rubber was a poor shiny rubber of the likes you would find in old Well VSR10 clones. The inner barrel is NOT standard. It's not VSR/GBB compatible...
Forum: Upgrades & Modifications November 11th, 2019, 20:58
Replies: 14
Views: 11,534
Posted By Drakker
Wow, maybe I should try with 0.25g or...

Wow, maybe I should try with 0.25g or something... I wasn't planning on keeping the stock hop-up rubber anyway, the Maple Leaf rubbers make such a huge difference in range and accuracy compared to...
Forum: Upgrades & Modifications November 10th, 2019, 16:05
Replies: 14
Views: 11,534
Posted By Drakker
Maybe the S&T comes with a better hop-up rubber?...

Maybe the S&T comes with a better hop-up rubber? Or it's a different batch? My Snow Wolf's rubber is utter crap. Anyway, the guns come from the same factory, and as far as internet lore goes, S&T and...
Forum: Upgrades & Modifications November 10th, 2019, 09:50
Replies: 14
Views: 11,534
Posted By Drakker
Great! I redid the 0.40g and 0.43g series.Turns...

Great! I redid the 0.40g and 0.43g series.Turns out it was an "operator problem" and the hop-up was lowered to minimum, I probably changed it without realizing it while manipulating the rifle and...
Forum: Upgrades & Modifications November 2nd, 2019, 11:42
Replies: 14
Views: 11,534
Posted By Drakker
Well, I got my hands on 0.4g BBs and 0.43g BBs...

Well, I got my hands on 0.4g BBs and 0.43g BBs and happily went along and tested them. The power fell sharply, way too sharply. So I chronoed again with 0.36g and 0.20g and surprise surprise, the...
Forum: Upgrades & Modifications October 23rd, 2019, 20:33
Replies: 14
Views: 11,534
Posted By Drakker
It's not compatible with VSR parts, except for...

It's not compatible with VSR parts, except for the hop-up rubber and possibly the barrel. I'll be opening mine next week when my replacement hop-up rubber comes in, so I'll be able to confirm then.
...
Forum: WW1, WW2 October 14th, 2019, 21:02
Replies: 4
Views: 10,598
Posted By Drakker
I don't know the groups in your area, but a good...

I don't know the groups in your area, but a good place to start looking would be at the annual event Operation Woodsman :...
Forum: Airsoft Guns Discussion September 15th, 2019, 14:07
Replies: 12
Views: 8,298
Posted By Drakker
Remove the upper, and see if a BB or something...

Remove the upper, and see if a BB or something else falls out.
Forum: Airsoft Guns Discussion September 14th, 2019, 19:35
Replies: 12
Views: 8,298
Posted By Drakker
This usually happens when a BB gets inside the...

This usually happens when a BB gets inside the gun and blocks the movement of the loading nozzle. It's unfortunately a common problem with this gun.
Forum: Gear Discussion August 20th, 2019, 09:11
Replies: 28
Views: 13,584
Posted By Drakker
These spam posts need to be deleted, otherwise...

These spam posts need to be deleted, otherwise the link spammers have won. They need these links to increase their search engine ratings. There is no point in banning them and leaving the posts, it...
Forum: Airsoft Guns Discussion August 14th, 2019, 09:50
Replies: 1
Views: 2,548
Posted By Drakker
https://www.airsoftglobal.com/shop/index.php?main_...

https://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=634_239&products_id=23330

Cyma AEP gearboxes are fairly common and cheap. The one linked is for the USP, but for your...
Forum: Doctor's Corner August 14th, 2019, 06:01
Replies: 8
Views: 5,799
Posted By Drakker
Ok, then its probably a problem with the leaf...

Ok, then its probably a problem with the leaf spring. When it is not in correctly, it prevents the trigger from resetting correctly if the trigger is still pressed when the slide moves and avtivates...
Forum: Doctor's Corner August 13th, 2019, 13:33
Replies: 8
Views: 5,799
Posted By Drakker
Does the slide blow back all the way when you...

Does the slide blow back all the way when you shoot?
Forum: Accessories Discussion July 27th, 2019, 16:10
Replies: 1
Views: 4,428
Posted By Drakker
You can get either the A&K or the Classic Army...

You can get either the A&K or the Classic Army magazines. Anything else wont fit.
Forum: Upgrades & Modifications July 27th, 2019, 16:09
Replies: 1
Views: 1,511
Posted By Drakker
This is not the best SVD on the market...

This is not the best SVD on the market unfortunately. It all depends on what you mean by "DMR performance"... it is a clone of the Classic Army SVD, albeit made of lower quality material. The Classic...
Forum: Airsoft Guns Discussion July 13th, 2019, 20:25
Replies: 61
Views: 32,241
Posted By Drakker
Turns out its easy to get them to shoot over 366.

Turns out its easy to get them to shoot over 366.
Forum: Airsoft Guns Discussion July 2nd, 2019, 09:45
Replies: 61
Views: 32,241
Posted By Drakker
Nice! How's the range and accuracy?

Nice! How's the range and accuracy?
Forum: Airsoft Guns Discussion June 20th, 2019, 22:04
Replies: 61
Views: 32,241
Posted By Drakker
I won't be there next Saturday... What battery...

I won't be there next Saturday... What battery size do you need? I might have one lying around...
Forum: Airsoft Guns Discussion June 20th, 2019, 16:03
Replies: 61
Views: 32,241
Posted By Drakker
Nice, can't wait to fondle it! You'll let me,...

Nice, can't wait to fondle it! You'll let me, right? :)
Forum: Airsoft Guns Discussion June 14th, 2019, 19:51
Replies: 2
Views: 2,686
Posted By Drakker
Depends on what you want to achieve. If you plan...

Depends on what you want to achieve. If you plan to keep the plastic stock, definitely go TM, it's way better than the JG stock. If you plan to switch the stock, then it's a closer call. Everything...
Forum: Airsoft Guns Discussion June 3rd, 2019, 20:25
Replies: 15
Views: 5,905
Posted By Drakker
The most useful snipers also happen to be the...

The most useful snipers also happen to be the CO's eyes. The sniper's most useful weapon is often his radio.
Forum: Doctor's Corner April 23rd, 2019, 06:22
Replies: 1
Views: 4,033
Posted By Drakker
Airsoftdepot.ca is the official reseller for...

Airsoftdepot.ca is the official reseller for Double Bell in Canada, so if anyone can get the parts, it's them.
Forum: Upgrades & Modifications April 13th, 2019, 13:38
Replies: 8
Views: 3,430
Posted By Drakker
The Action Army hop-up chamber is easier to...

The Action Army hop-up chamber is easier to adjust than the PDI and is easy to mod for a TDC (to-dead-center adjustment screw above the barrel), but its not any more accurate than the stock hop-up...
Forum: Upgrades & Modifications April 12th, 2019, 12:15
Replies: 8
Views: 3,430
Posted By Drakker
This is a new VSR10 clones... So the minimum we...

This is a new VSR10 clones... So the minimum we would need to help you would be pictures of the parts. Measurements would help. With that said, the PDI hop-up unit is not very good. Unless you...
Forum: Airsoft Guns Discussion March 30th, 2019, 21:12
Replies: 61
Views: 32,241
Posted By Drakker
If you want a GBB MP7 both the KWA and the Tokyo...

If you want a GBB MP7 both the KWA and the Tokyo Marui are great choices. They are not 100% to size though, while the VFC is the right size, but is not super reliable. I'd take the new AEG MP7 over...
Forum: Airsoft Guns Discussion March 30th, 2019, 19:12
Replies: 61
Views: 32,241
Posted By Drakker
If you really need a new gun right now, look at...

If you really need a new gun right now, look at the ASG Scorpion EVO. Feature-wise its the same as the VFC MP7, and its also about the same length. The gun has been on the market for a few years now,...
Forum: Airsoft Guns Discussion March 30th, 2019, 17:57
Replies: 61
Views: 32,241
Posted By Drakker
Easily fixed... Don't worry they will get in...

Easily fixed... Don't worry they will get in legally sooner than later.
Showing results 1 to 50 of 500

 
Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 05:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.