How to install a King Arms AN/PEQ-15 Battery Case on VFC M4 Sopmod
 

Hey guys I was wondering if anyone could point me in the right way. I just scooped a King Arms AN/PEQ-15 Battery Box and would like to mount it to my RIS rail on my VFC M4 Sopmod, but I just don't know how to do it? Any help would be great!

along one of the sides there should be an allen screw loosen this
undeneath you will see the rail mounting "claw" after you loosen the screw the sides will spread apart, place on your rail, tighten screw and tada!

Thanks RITZ but that's not what I was talking about, I need to know how to run my battery wires through the VFC to the for grip but can't stretch them through. Do I need a new set of wires and do I need to take the motor out of the handle?

You're going to have some wires slightly exposed as they make their way through the receiver/outer barrel assembly, past the holes in the RIS and to the battery box.

It may also require lengthening/shortening some wires, yes.

Nortus is there a how to video to show me how to do this, I work better with visual aids........Thanks

since the VFC is rear wired, you gota rewire to the front thats a start :)

So would a KA V2 Low Resistance Switch Assembly (Front) be the wiring that I need to do the job?

Yes. And if you've never opened a gearbox before you'll probably want someone else(like a gundoctor) to do it.