Surefire M952v Flickering Dimming issue solved
Ever have this issue? I did. I would always hit the light and it would flicker or go dim. Here is why
There is a screw that holds a spring down in the back cap where you attach the pressure switch. On that screw there is a wire soldered to it. Chances are, it's a cold solder. This has been bugging me for a long time. So I decided to figure out how I can dissect this thing. In the back cap you can see that there is a ring that is holding everything in. There are 2 square cutouts you can see. Take an Small Tweaker (flathead) screw driver and stick it in one of the tiny squares and unscrew counter clockwise. Re-tin the screw and the wire. Solder back together and boom!! Bright as ever. I will post some pictures laters. |
|
Nice post, will have to check out mine to see if it needs this.
|
Quote:
Totally worked for me. Was excited like it was brand new. |
Hey man, new to this. I am having the same problems is there any way we can talk about this together?
|
Hate to burst your bubble but the 952v is a VERY old light at this point.
However, it is compatible at its butt end with the 6p series of of caps as well as the P2x Furies. Their is a huge aftermarket third party support for these lights as they are over built and can be bored for 18650 batteries, also lots of after market heads. |
All times are GMT -4. The time now is 23:33. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.