M249 hop up
 

hey guys and gals just a quick question im looking to replace my hop up bucking nub on my saw and not sure of a good one to get. if you would point me in the right direction would be awsome.

thanks
kharyunn

If it's an A&K/Echo1/CA
 

Take a piece of heavy electric wire and strip the insulation off.

Take that piece of insulation and cut it a bit longer than the stock nub and use that.

ah never thought of that i saw people do the pen thing but i would not do that.
good idea

thanks

That is the Crunchmeister mod. I did that and got an extra 40 feet out of my gun.

I made on mine and works. But it is very hard as nub. I never tested the sheath electric. But in my test both and chose the one you like best.

And your Heatshield?

lol its working great i wasnt going to get one just leave the canadian look but im running a para stock for nightfall so i needed to hide the batteries in the front lol

The big disadvantage of the stock para. This is for the battery. I have the full stock and I have a 9.6v 5000mAh. Send me a picture of your SAW.
Envoyé depuis mon SGH-I747M avec Tapatalk