Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Canadian Airsoft News Stand (https://airsoftcanada.com/forumdisplay.php?f=188)
-   -   FCC 2013 new release (https://airsoftcanada.com/showthread.php?t=152394)

MASAKO August 20th, 2013 16:56

Quote:

Originally Posted by wildcard (Post 1826658)
Start saving for Christmas

You are not joking, right ? AK platform, start to save up then. Too many list for this Christmas.

wildcard August 20th, 2013 17:01

Quote:

Originally Posted by MASAKO (Post 1826665)
You are not joking, right ? AK platform, start to save up then. Too many list for this Christmas.

Nope pending on the prototype its scheduled around Christmas but before that will be the .308/7.62 platform first ie. SR25, M110

SuperHog August 20th, 2013 23:15

It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

Dynamo August 20th, 2013 23:45

Quote:

Originally Posted by SuperHog (Post 1826952)
It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

CNCed pot metal is still pot metal.

SuperHog August 20th, 2013 23:52

The FCC budget series are also going to be pot metal.

I am also curious how many FCC CNC guns have been sold.

wildcard August 21st, 2013 00:38

Quote:

Originally Posted by SuperHog (Post 1826952)
It is it good or bad timing for FCC with their budgets series when they have limited production capabilities?

Systema announced that this fall their new M4s will be CNCed.

Quote:

Originally Posted by SuperHog (Post 1826970)
The FCC budget series are also going to be pot metal.

I am also curious how many FCC CNC guns have been sold.

i hope that will also include a more reliable motor, as far as I know there are
over 1000 units of 416D and other models (FFL and XM), mostly in Europe, South East Asia

In Canada probably around 100+ (I have 4)

wildcard August 21st, 2013 00:43

Just a little sneak peek.......Who wants one?
http://i43.photobucket.com/albums/e4...ps53026fe9.jpghttp://i43.photobucket.com/albums/e4...psac7c3fbd.jpg

SuperHog August 21st, 2013 00:44

I think FCC make great guns, they need to set up more dealers worldwide for the budget series?

SuperHog August 21st, 2013 00:46

Quote:

Originally Posted by wildcard (Post 1826986)

How much $$$?

wildcard August 21st, 2013 00:48

Prototype only buddy not finished yet

ThunderCactus August 21st, 2013 09:50

Quote:

Originally Posted by wildcard (Post 1826670)
Nope pending on the prototype its scheduled around Christmas but before that will be the .308/7.62 platform first ie. SR25, M110

SR25 PTW??
https://i.chzbgr.com/maxW500/6274107904/h64AD59F7/

wildcard August 21st, 2013 10:27

Quote:

Originally Posted by ThunderCactus (Post 1827028)

yes, The boys will be busy through 2016 with the list of projects to be launch. these were on design phase right now.
http://i43.photobucket.com/albums/e4...ps0e257d0f.jpghttp://i43.photobucket.com/albums/e4...psa1a28c34.jpghttp://i43.photobucket.com/albums/e4...ps3beffaa7.jpg

ThunderCactus August 21st, 2013 10:35

So without thinking too far into it;
-regular cylinder
-longer mags with modified 5.56 internals, but the feed lips will be the same distance from the back of the mag so you can use the same cylinder
-same mechbox/motor
-'normal' SR25 receiver modified for use with PTW internals
-the outer barrel is going to make up for the length hold the hop chamber closer to the cylinder

that about right? lol

Oh also, Brad had pointed out the gap in the end plate of the MOE grip. Seems you guys are using MIAD end plates on a MOE grip. Since the new motor apparently produces very little heat, will they be revising the grip to use the proper end plates to seal the grip and prevent any crap from getting into the motor?

wildcard August 21st, 2013 11:24

Quote:

Originally Posted by ThunderCactus (Post 1827051)
So without thinking too far into it;
-regular cylinder
-longer mags with modified 5.56 internals, but the feed lips will be the same distance from the back of the mag so you can use the same cylinder
-same mechbox/motor
-'normal' SR25 receiver modified for use with PTW internals
-the outer barrel is going to make up for the length hold the hop chamber closer to the cylinder

that about right? lol

Oh also, Brad had pointed out the gap in the end plate of the MOE grip. Seems you guys are using MIAD end plates on a MOE grip. Since the new motor apparently produces very little heat, will they be revising the grip to use the proper end plates to seal the grip and prevent any crap from getting into the motor?

Nope, can't reveal the details but none of the design will derived from Systema, this and the next platform will be truly ground up FCC design.

ThunderCactus August 21st, 2013 13:11

Hm. Not totally appealing. I'd rather have good systema compatibility so I don't have to have a pair of SR25s to swap parts back and forth in the field.
I don't see any point to having a longer barrel/cylinder, most experts agree the shorter barrels are more accurate; the science is sound and we've got plenty of first hand experience that backs that up.
I REALLY want an SR25K though lol


All times are GMT -4. The time now is 00:50.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.