Yeah I saw these but was hoping for a bino style setup

dual PVS14 setups seem to be even more rare than AVNIS. PVS-14 monoculars are rare enough as it is. I think your best bet it to just buy a pair of monoculars as they come up and combine them yourself.

Or buy new. Unfortunately our dollar is the shits and you can't import everything. There are Canadian retailers for NVG though.

Check here for ideas:

http://www.nightoptics.com

if you look around you can usually find ANVIS-9 for cheaper than 2x PVS-14 or 15s, if you have a USA guy you can get them off ebay for cheap, or through europe. Check the Systema PTW forums, lots of NVGs come up on there.

Yeah I'd really love an ANVIS6/9, ...you mentioned "if I have a U.S. guy" I used to live there and have tons of access but since NVGs are ITAR controlled.....

As far as shopping from Europe, any suggestions on how I would start?

Thanks guys,

Go to the systema ptw forum, and buy NVG as it comes up lol
ITAR only applies to the US, as long as it's not coming from or through the states you can pretty much get whatever fancy ass optics you like.

Also, not all NVG is ITAR controlled. In fact, there's a lot of lower end gen3 stuff that isn't, including some ANVIS tubes I think....
Problem is accessories. Getting an old PVS-14 under FOM 1500 is easy enough. But getting a cheap ass dime a dozen J-arm can be a real pain.

http://www.systema-ptw.com/forum/

Lots of NVG comes up forsale on there.
How much are you looking to spend. I may know of a set of ANVIS-9s coming up forsale over the winter.

Team mates of mine use Valken Zulu goggles/glasses and Revision Stingerhawks with no problems with their NODs.
They're both gen 3+, should that be of interest.

I have run ESS turbofans and Smith OTW fan goggles with no problems behind my PVS-14. The mounting solution will make all the difference for what fits. I run a Wilcox J-arm and mount if that helps you at all.

Thanks brother!