Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   Helmet Gallery (https://airsoftcanada.com/showthread.php?t=39397)

Zack The Ripper September 4th, 2012 21:40

Quote:

Originally Posted by c3sk (Post 1699560)
This was another thing we hated about them. Nothing beats that Boogie regulator imprint on your face after a 8hr+ game.

Yeah, that's really the biggest downfall. I played on Sunday at Finch Field and I still have a little redness over the bridge of my nose. Great for a couple hours of skirmish, but anything past that I would say is a no-no for these bad boys.

mmmken September 4th, 2012 21:58

Quote:

Originally Posted by c3sk (Post 1699557)
I would hope so, considering they are anti-fog wipes...
But that implies that they would fog if you didn't use anti-fog wipes. Correct?

I sweat excessively just doing nothing, so I'd probably need anti-fog wipes for virtually any type of goggles. I've had the Oakley ballistic goggles, the ESS NVG's, Revision Locusts, these Smith Optics, and a pair of fake Bolle X800's. The only pair that didn't fog were the fake X800's and that was because there were huge gaps all over the place.

Zack The Ripper September 4th, 2012 22:08

Quote:

Originally Posted by mmmken (Post 1699566)
I sweat excessively just doing nothing, so I'd probably need anti-fog wipes for virtually any type of goggles. I've had the Oakley ballistic goggles, the ESS NVG's, Revision Locusts, these Smith Optics, and a pair of fake Bolle X800's. The only pair that didn't fog were the fake X800's and that was because there were huge gaps all over the place.

One idea that myself and some other individuals had was cutting slits about 5mm wide every inch along the foam for the SO Boogies to allow for more ventilation. Seeing as they won't be my main pair I may give this a try and post to my thread whenever I actually get to give them a try like that. Can't hurt.

makinitbig September 4th, 2012 22:18

I have two pairs of regulators right now and planned to use them whenever I got back to playing airsoft (leave them on my helmet at the range.) I haven't tested them too extensively for fog... Never heard of dishsoap before as an anti-fog treatment lol.

Another question. WHAT ARE THE NAME OF THESE WINGLOCK ADAPTERS!?
http://i943.photobucket.com/albums/a...ike/342342.jpg

I've been looking for weeks. Asked several different people/shops to no avail.

mmmken September 4th, 2012 22:23

Quote:

Originally Posted by makinitbig (Post 1699579)
I have two pairs of regulators right now and planned to use them whenever I got back to playing airsoft (leave them on my helmet at the range.) I haven't tested them too extensively for fog... Never heard of dishsoap before as an anti-fog treatment lol.

Another question. WHAT ARE THE NAME OF THESE WINGLOCK ADAPTERS!?
http://i943.photobucket.com/albums/a...ike/342342.jpg

I've been looking for weeks. Asked several different people/shops to no avail.

Dude, I PM'ed you with the name already, lol.

They come with these: http://www.oneshottactical.com/Merch...tegory_Code=PW

makinitbig September 4th, 2012 22:40

Quote:

Originally Posted by mmmken (Post 1699586)
Dude, I PM'ed you with the name already, lol.

They come with these: http://www.oneshottactical.com/Merch...tegory_Code=PW

haha I didn't know they came with them... I've asked probably 15 people and nonone mentioned them.... :banghead:

ViR September 4th, 2012 22:45

Quote:

Originally Posted by mmmken (Post 1699586)
Dude, I PM'ed you with the name already, lol.

They come with these: http://www.oneshottactical.com/Merch...tegory_Code=PW

Oh, that is sweet.. much better than my velco setup that I have right now..

Zack The Ripper September 4th, 2012 23:14

Quote:

Originally Posted by makinitbig (Post 1699579)
Never heard of dishsoap before as an anti-fog treatment lol.

Yep, divers use it a lot. You take a drop on your finger, rub it on the inside of the lens, wait for it to dry a bit, and then buff it off with a microfiber cloth.

SuperHog September 5th, 2012 00:18

In an emergency, you spit will work as well.

makinitbig September 10th, 2012 19:15

After some detective work I found a base jump to use as a temp helmet until more Ballistics come onto the market or Crye starts making lids
that will fit my head. Pretty stoked about only having to wait two days; not fourteen weeks for this lol.
Came home from a wedding this weekend to two packages on my doorstep.

Waiting for the real goodies to show up. Night enforcer, Wilcox steel, Manta, ect.
http://i943.photobucket.com/albums/a...e/IMG_0228.jpg
http://i943.photobucket.com/albums/a...e/IMG_0226.jpg

Going to re-purpose it as a climbing/atv helmet after.

mmmken September 10th, 2012 22:51

Two days? Brand new? Where?

Derpystronk September 11th, 2012 00:43

Ken, the man has the ambition of a jack russel. When he wants something he finds a way to get it. Period. Nothing will stop him.

I know cause I'm the same way. It's a bad trait to have :p

justiceorjustus September 18th, 2012 22:08

anyone seen this yet?

http://soldiersystems.net/blog1/wp-c...815-140032.jpg

thoughts?

I'm considering it because i do not want to wait a year for my opscore to be in stock, but im not sure what to use to setup my pvs14 to the wilcox one built into the helmet

http://soldiersystems.net/2012/09/17...w-at-gss-gear/

panzergrenadier September 18th, 2012 22:15

Looks snazzy!

Conker September 18th, 2012 22:35

More expensive than the Basejump. Almost double.

Meh.

justiceorjustus September 18th, 2012 22:46

I just emailed the company and they have stock in hand ready to sell however and I sadly quote "the issue we have is that the mount is ITAR controlled thus we will be unable to export, or sell to non American citizens, without an exception letter from the State Department."

anyone want to help me out? :)

MASAKO September 18th, 2012 23:38

Hmmm ! Is it really that short cut on op-core base jump helmet ? I bought one for my boyfriend like 3 to 4 months ago and it took about 5 days by DHL express delivered to the front door.

I consider want one for myself as well, might to have to change my mind and look for alternative. Any suggestion ?

Santa coming early this year from North pole, will post pic with complete NVG set up, next year will go to dual set up, One 14 is enough for now since I still want to go to DimSum regularly.

DesertF0x9 October 4th, 2012 11:01

Quote:

Originally Posted by Karma_ (Post 1678583)
Both engaged or disengaged I get the same result. I got my VAS direct from Ops-Core.

I just got my G24 and it wobbles in my VAS Shroud as well. Doesn't when attached to my base jump helmet though.

pugs144 November 4th, 2012 10:04

For the guys running red + blue/green strobes, remember that red goes on the port side and blue/green goes on the starboard side as per aviation and marine convention. Otherwise it might get confusing for some of us lol.

Qlong November 4th, 2012 10:14

Quote:

Originally Posted by pugs144 (Post 1721823)
For the guys running red + blue/green strobes, remember that red goes on the port side and blue/green goes on the starboard side as per aviation and marine convention. Otherwise it might get confusing for some of us lol.

Otherwise...

http://cdn.memegenerator.net/instanc...x/22142083.jpg

pugs144 November 4th, 2012 10:34

...or is it???!!

KNIVEZS November 14th, 2012 11:06

http://i48.tinypic.com/eughfs.jpg

http://i50.tinypic.com/23sdld3.jpg

horto November 14th, 2012 13:24

Quote:

Originally Posted by pugs144 (Post 1721823)
For the guys running red + blue/green strobes, remember that red goes on the port side and blue/green goes on the starboard side as per aviation and marine convention. Otherwise it might get confusing for some of us lol.

Also, don't forget to stick your arms out and run around making airplane noises all over the AO.

Edit: Inspiration here: https://www.youtube.com/watch?v=dRR3iATGtRA

Reignman November 14th, 2012 13:45

Quote:

Originally Posted by KNIVEZS (Post 1725589)

Nice paint job dude, would like to know how you did it.

ShelledPants November 14th, 2012 13:50

Quote:

Originally Posted by KNIVEZS (Post 1725589)

Knives, where the hell do you buy the fixed goggle clips? The swivel clips suck.

Spike November 14th, 2012 14:01

Jigsawcam!

solidgear34 November 14th, 2012 16:31

Quote:

Originally Posted by bruce (Post 719116)

is the nvg real?

KNIVEZS November 14th, 2012 16:41

Quote:

Originally Posted by ShelledPants (Post 1725652)
Knives, where the hell do you buy the fixed goggle clips? The swivel clips suck.

they originally came with the helmet.

this one? http://www.ebairsoft.com/goggle-swiv...el-p-5200.html
looks exactly the same .

ILLusion November 14th, 2012 17:39

I thought those clips are for attaching respirator units, rather than goggles.
As Knivesz said, they come with the helmets.

mmmken November 14th, 2012 17:43

Quote:

Originally Posted by ILLusion (Post 1725742)
I thought those clips are for attaching respirator units, rather than goggles.
As Knivesz said, they come with the helmets.

This is correct, but I'm not sure any of us require respirators, lol. I personally use mine to attach my lower face mask and it works fantastic.

AngelusNex November 14th, 2012 17:47

They are great for these lo profile mesh half mask
Rigged mine up with some thin bungee type cords, very nice.

Shirley November 14th, 2012 21:17

I don't even think my base jump (real) came with the clips..

Cobrajr122 November 14th, 2012 23:02

Quote:

Originally Posted by Mr.Hitman (Post 1725856)
I don't even think my base jump (real) came with the clips..

Mine did not.

Junky November 15th, 2012 02:00

Only the reps* come with the clips unfortunately... I think they are too small for most goggle straps anyways, think ESS.

ViR November 15th, 2012 08:50

Mine didnt either, and OpsCore wants $59 for the O2 mask straps with clips:
http://www.ops-core.com/O2_Single_St...AST__P15C6.cfm

ShelledPants November 15th, 2012 09:21

I'm just going to use mine to hold on my mask*. I'll settle with the repro clips. (My OPSCore is real as well, did not come with clips.)

*Face, not eyes.

Stealthee November 19th, 2012 20:52

Protec A-Bravo. Modded with repo ARC rails and NVG shroud.

http://www.airsoftcanada.com/picture...pictureid=4993
http://www.airsoftcanada.com/picture...pictureid=4994

Dingo November 22nd, 2012 22:29

http://i1253.photobucket.com/albums/...z/photo8-1.jpg

http://i1253.photobucket.com/albums/...z/photo4-2.jpg

calgary-storm-troopers November 23rd, 2012 15:00

http://i1200.photobucket.com/albums/...18694D9356.jpg[/IMG]
[IMG]http://i1200.photobucket.com/albums/...186F06E8D8.jpg[/IMG] my issued cg634

freak31 November 29th, 2012 15:59

Airsofter from New Jersey here. You guys have some pretty incredible brain buckets (going through this entire thread works wonders for procrastinating). How seemingly all of you can afford NODs and authentic Ops Core helmets is beyond me...

mmmken November 29th, 2012 16:06

Got bored, so took a proper photo.

http://tech.jhcomputer.ca/asc/helmet-top.jpg

Brian McIlmoyle November 29th, 2012 16:20

Quote:

Originally Posted by freak31 (Post 1730955)
Airsofter from New Jersey here. You guys have some pretty incredible brain buckets (going through this entire thread works wonders for procrastinating). How seemingly all of you can afford NODs and authentic Ops Core helmets is beyond me...

it's CANADA. the land of Milk and Honey!...

not everyone can afford NODS and OPS-Core helmets.. just they guys who post in this thread ( and many of them can't actually "afford them" either)

freak31 November 29th, 2012 16:27

Quote:

Originally Posted by Brian McIlmoyle (Post 1730958)
it's CANADA. the land of Maple Syrup and Canadian Bacon!...

Fixed.

All jokes aside though, this seems like a great forum! I thought I made alright money as an IT Tech but I could only dream of owning a pair of NODs. I'm going to have to take out a loan to keep up with you canucks.

Curo November 29th, 2012 16:44

Buy a reliable car (or just don't own one).
Don't buy other things.
Stay single women are expensive.
Curb your drinks habits.
Save your money.

Some of these guys have been around for years and thus bought stuff slowly. Others haven't and have either splurged. Keep in mind the hardest part of getting an Ops Core (BJ atleast) isn't paying for it, but finding one in stock or for sale.

jupiterl November 29th, 2012 19:56

Quote:

Originally Posted by justiceorjustus (Post 1704654)
anyone seen this yet?

http://soldiersystems.net/blog1/wp-c...815-140032.jpg

thoughts?

I'm considering it because i do not want to wait a year for my opscore to be in stock, but im not sure what to use to setup my pvs14 to the wilcox one built into the helmet

http://soldiersystems.net/2012/09/17...w-at-gss-gear/

Really interested in this one, since there is so many ops-core replica.

T@NK November 29th, 2012 20:03

get 1 then =D

Curo November 29th, 2012 20:18

Yea with Ops Core being so popular(and sold out). There is a market there for Fast style helmets. I love my ops core but If I didn't have it I would definitely be looking at the Team Wendy and Protec's.

Kokanee November 29th, 2012 20:29

Here is a pic of the new Combat Vehicle Crew (CVC) helmet that has just entered service the last few months;

http://i.imgur.com/9Ja81.jpg

*Edit: Should be noted the mandible protection is removable, and I don't think I'll ever be using it as it's just a pain to wear a microphone with it on.

Dimitri November 29th, 2012 20:36

Quote:

Originally Posted by Brian McIlmoyle (Post 1730958)
and many of them can't actually "afford them" either

That is what credit cards are for, swipe and repeat. :p

Dimitri

Curo November 29th, 2012 20:36

Nice... chin cup?

Cobrajr122 November 29th, 2012 21:14

They kind of have this problem too....

http://img191.imageshack.us/img191/9135/riflesight.jpg

FirestormX November 29th, 2012 21:18

Man, that sucks. I'd join the army JUST so that I could fire a gun with a good cheek wield and not have to worry about losing a tooth. And they go and take that away from the poor soldier.

On the bright side, you can say "just grab a JT mask. Not being able to get a cheek wield is more milsim.

Trev140_0 November 29th, 2012 21:51

https://dl.dropbox.com/u/57165679/Ha...1129-00035.jpg

Kokanee November 30th, 2012 06:12

Quote:

Originally Posted by -Skeletor- (Post 1731086)
Kokanee, how's the helmet? Similar suspension to the normal helmet? Looks like it has a different chin strap.

Good that the mandible is a optional item. Seems like someone wasn't thinking about the headsets veh crews wear when they added that to the helmet.

It's really nice - skydex type pads and an ops core style dial suspension.

Kokanee November 30th, 2012 11:46

Well there is a thin impact foam liner between the pads and the shell, so I guess that fixes the "standoff" problem. These helmets are far and few in between right now and are part of a vehicle's kitout, not pers issue as we don't have enough...

About 60 people in the Regt who could be reasonably expected to drive or command an armoured vehicle right now, and like 8 helmets.

Off_kilter November 30th, 2012 12:16

In my unit they have been issued to personnel. But yeah I wouldn't even say a quarter of the unit has them(Armoured unit). One thing though that stand alone liner is rediculous looking.

Kokanee December 1st, 2012 14:24

Quote:

Originally Posted by Off_kilter (Post 1731286)
In my unit they have been issued to personnel. But yeah I wouldn't even say a quarter of the unit has them(Armoured unit). One thing though that stand alone liner is rediculous looking.

You fellows have the new Leopard IIs yet?

Cobrajr122 December 1st, 2012 14:48

They are in Gagetown.
The tank range is close to my house, the C1s were not very loud, you always knew they were shooting but they did not bother me. The C2s shake my house and wake me up in the morning...not looking forward to the next forever.

Gato December 1st, 2012 15:00

Quote:

Originally Posted by Cobrajr122 (Post 1731721)
They are in Gagetown.
The tank range is close to my house, the C1s were not very loud, you always knew they were shooting but they did not bother me. The C2s shake my house and wake me up in the morning...not looking forward to the next forever.

I'd love to hear tanks all the time :3

Mind you, I lived near railroads most of my life.

Off_kilter December 1st, 2012 17:41

Quote:

Originally Posted by Kokanee (Post 1731714)
You fellows have the new Leopard IIs yet?

You betcha We have both the training and OPS versions. I think we've only badly broken 2 or 3 so far...

hot_shot under fire December 11th, 2012 10:16

I have a couple of questions in regards to the Fast helmets out there.

First of all, aside from the obvious differences of the holes in the helmet what is the difference between the Ballistic and PJ style Fast helmets? Are there any size/shape differences I should be aware of? I ask this because I will be picking up a helmet cover that is designed for the Ballistic style Fast helmet, and it is unclear weather it will fit on a PJ style helmet properly or not.

Second, has anybody run a Bowman style headset with a Fast helmet here? Does the helmet "cooperate" with the headset? Or does the headset interfere with the helmet making things uncomfortable?

And to make it clear, I am talking about airsoft replicas of the helmets, not the real versions. I'm afraid my addiction to this sport will drive me to get the real deal helmet just for the hell of it if somebody remarks about how great the real ones are...

Thanks to any answers I can get in advance!

mmmken December 11th, 2012 16:26

Quote:

Originally Posted by hot_shot under fire (Post 1735100)
I have a couple of questions in regards to the Fast helmets out there.

First of all, aside from the obvious differences of the holes in the helmet what is the difference between the Ballistic and PJ style Fast helmets? Are there any size/shape differences I should be aware of? I ask this because I will be picking up a helmet cover that is designed for the Ballistic style Fast helmet, and it is unclear weather it will fit on a PJ style helmet properly or not.

Second, has anybody run a Bowman style headset with a Fast helmet here? Does the helmet "cooperate" with the headset? Or does the headset interfere with the helmet making things uncomfortable?

And to make it clear, I am talking about airsoft replicas of the helmets, not the real versions. I'm afraid my addiction to this sport will drive me to get the real deal helmet just for the hell of it if somebody remarks about how great the real ones are...

Thanks to any answers I can get in advance!

Bowman works, but it really depends on the size of your head.

In any case, the Jump/Base (or PJ style) helmets have a different shaped non-removable shroud while the Carbon and Ballistic version have the removable VAS shroud. You may have trouble fitting your cover without modifications with this in mind.

With that said, get the real one if possible. A base jump is about $250-300, while the quality replicas (from AirsoftDepot) are already $120-140. Resale value alone is worth the premium. If you must get a replica, skip the "basic/non-premium" version if you can. The finish and thickness of the premium version is far superior. You will hate yourself with the basic (cheaper) version.

Kokanee December 11th, 2012 16:30

Also it is like fricking impossible to find a replica base jump for a head size of 7 1/2 or larger.... :(

DaRkCoMmAnDo December 11th, 2012 19:58

Are you sure Kokanee? I'm pretty sure my head size is 7 1/2 and my replica BJ fits fine. Mine is the one from huang.

Kokanee December 11th, 2012 21:06

Well I have a size 7 7/8 head and no go by a long shot, the 7 1/2 comment is from talking to other people who have had fitment issues and that is where the problems seem to start. I am glad yours fits though! ;)

DaRkCoMmAnDo December 11th, 2012 22:00

Ah, I hear ya. You're sort of having the opposite issue I have with repro BDU's, the smallest size is still too big for me. I sort of feel your frustration bud.

FlyGuy December 11th, 2012 22:04

Quote:

Originally Posted by Kokanee (Post 1735333)
Well I have a size 7 7/8 head and no go by a long shot, the 7 1/2 comment is from talking to other people who have had fitment issues and that is where the problems seem to start. I am glad yours fits though! ;)

My melon is around the same size as yours and even my real Ops-Core BJ has issues...mainly in the chin straps. The L/XL bucket itself fits fine with room to spare but the webbing doesn't have much left over once the buckle is snapped in, more especially so if I actually bother to place the chin cup properly rather than tucking it under. The straps really could have used another inch or two length IMHO.

Fly

SuperCriollo December 13th, 2012 21:12

My K-pot after a quick paint job on a spare helmet cover :)
Im happy with how it looks!
http://img254.imageshack.us/img254/8...1213203712.jpg

Dynamo December 13th, 2012 22:15

[QUOTE=SuperCriollo;1736132]My K-pot after a quick paint job on a spare helmet cover :)
Im happy with how it looks!


why are the mags in the hand guard?
still looks cool

SuperCriollo December 14th, 2012 00:55

[quote=Dynamo;1736147]
Quote:

Originally Posted by SuperCriollo (Post 1736132)
My K-pot after a quick paint job on a spare helmet cover :)
Im happy with how it looks!


why are the mags in the hand guard?
still looks cool

http://2.bp.blogspot.com/_rzdB5a4kLA..._and_death.jpg

That's how it is on the original design. I suppose the illustrator opted to put them there because it helps with the composition. It makes it look more like a jolly roger I think :P

Cico December 14th, 2012 07:35

not that awesome but its a start.http://i1341.photobucket.com/albums/...8BEF54A7D7.jpg
Emerson Basejump
Custom Cover from an old CF medium cover.

Need to add
NVG Arm
Posts for Boogie Regulators
Comtacs( once i save a bit)


No Velcro or glitzy shit. Keeping it simple and functional. I dont need somthing that weighs a tome to card arround all game

CrAzy AziAn December 22nd, 2012 01:23

http://i1064.photobucket.com/albums/...ps58e1ef7d.jpg
http://i1064.photobucket.com/albums/...pse2472b88.jpg

Started on a helmet :D

Off_kilter December 22nd, 2012 11:27

Ugh my new helmet is in Edmonton!

Only teasers I have are that is has integrated comms and integrated eye protection!

Kingsix December 22nd, 2012 18:54

You got a K6-3?

Off_kilter December 22nd, 2012 18:59

Rys-T

http://desmond.imageshack.us/Himg27/...pg&res=landing

Frozen Tex December 23rd, 2012 14:57

That. Is. Awesome.

Off_kilter December 23rd, 2012 16:38

I kind of want Christmas vacation to be over just so I can try on my Russian tactical welding helmet ;)

Cobrajr122 December 23rd, 2012 18:35

I know how you feel, I finally got my MSA sordins working with the XTS2500 and cant wait to use em!

OM3GA December 29th, 2012 04:38

Well I finally went over the edge and decided to get an Ops Core Base Jump (real not repro). I was close to getting a Protec Bravo but patience paid off. Since it is multicam I am leaning towards getting a War Bungee instead of the First Spear cover I was set on, I'm also considering a TYR cover but I'm not sure. The wait is killing me and I still can't believe I'm getting one without the insane waiting period. I will post some pics once I have it.

Now I just have to start saving for nv! Who knows maybe by the time I have that money I can get a PSQ-20 DSNVG or maybe even a set of GPNVG's. (I can dream can't I?) :D

Cortex December 30th, 2012 04:38

I just discovered this awesome cup, it basically fits my headgear just like a bust would...

Meet Mr. Cup:
http://i.imgur.com/MxtgW.jpg

Nothing to fancy yet, though I plan to throw a laundry bag over it and get some paint pattern going on.

Zack The Ripper December 30th, 2012 10:44

Quote:

Originally Posted by Cortex (Post 1741167)
I just discovered this awesome cup, it basically fits my headgear just like a bust would...

Meet Mr. Cup:
http://i.imgur.com/MxtgW.jpg

Nothing to fancy yet, though I plan to throw a laundry bag over it and get some paint pattern going on.

Even minus the paint job, it's looking pretty badass so far.

Cortex January 3rd, 2013 20:48

Added some Krylon Fusion-Camouflage Brown, with a sprinkling of Khaki over top:
http://i.imgur.com/Pus9U.jpg

iPhone camera is bad, I'll probably get some shots with the DSLR when I get unlazy.

tygr701 January 3rd, 2013 21:18

Quote:

Originally Posted by Kokanee (Post 1731067)
Here is a pic of the new Combat Vehicle Crew (CVC) helmet that has just entered service the last few months;

http://i.imgur.com/9Ja81.jpg

*Edit: Should be noted the mandible protection is removable, and I don't think I'll ever be using it as it's just a pain to wear a microphone with it on.

Reminds me of boxing headgear :/. Surprised they didn't go with the Batlskin type mandible.

Off_kilter January 3rd, 2013 21:23

you should see it without the ballistic shell...

Karma_ January 3rd, 2013 22:34

http://i684.photobucket.com/albums/v...ps34673afc.jpg

c3sk January 4th, 2013 01:44

Nice Karma!

Cortex January 4th, 2013 02:29

Gosh those airframe covers are nice!! I was thinking of getting one of the FirstSpear covers for my lid when I want to go full Multicam...

Anyway, I took some nicer pics of my paint job... I think it looks pretty nice, but I've never done one of these before:
http://i.imgur.com/YYVmb.jpg
http://i.imgur.com/WetJY.jpg
http://i.imgur.com/Cp2Vu.jpg

nstahl.19 January 4th, 2013 02:32

That paintjob is perfect! Agreed, love those first spear helmet covers.

Zack The Ripper January 4th, 2013 09:18

Great looking bucket Karma. Nice paint job Cortex. Looks like the paint job on mine.

Kokanee January 4th, 2013 09:25

Quote:

Originally Posted by tygr701 (Post 1742543)
Reminds me of boxing headgear :/. Surprised they didn't go with the Batlskin type mandible.

I know, I'm always bringing that up when people start chatting about this at work. Typical "gotta reinvent the wheel" mentality that dominates CF procurement.

As a crew helmet it is great when used without the mandible, comfortable and a big improvement over the last one.

T@NK January 4th, 2013 09:33

Quote:

Originally Posted by Karma_ (Post 1742571)

post your complete CAG load out please.

Curo January 4th, 2013 11:04

Probably my last post with this helmet :(

Real Ops Core Base Jump.


http://i849.photobucket.com/albums/a...airsoft002.jpg
http://i849.photobucket.com/albums/a...o/DSCF1768.jpg
http://i849.photobucket.com/albums/a...o/SAM_6088.jpg
http://i849.photobucket.com/albums/a...ro/gearpic.jpg
http://i849.photobucket.com/albums/a...o/IMAG0003.jpg

Off_kilter January 6th, 2013 14:56

I got it!

http://i258.photobucket.com/albums/h...psb444f393.jpg

Cortex January 6th, 2013 15:55

That looks painful... ;)

Gato January 6th, 2013 15:55

Quote:

Originally Posted by Off_kilter (Post 1743399)

You win :)

OM3GA January 8th, 2013 19:07

http://imageshack.us/a/img546/6087/img1156k.jpg
This is the best helmet I have ever had and I love it! Now it's time for all the goodies, and the first thing on my list is a War Bungee and then an MPLS.

daishi January 20th, 2013 15:29

3 Attachment(s)
This is my first helmet. Constructive criticism is welcome!

Desmodus January 20th, 2013 15:31

Quote:

Originally Posted by Off_kilter (Post 1743399)

Hatred and Envy. I feel it. :-)

Cobrajr122 January 20th, 2013 17:39

Quote:

Originally Posted by daishi (Post 1749141)
This is my first helmet. Constructive criticism is welcome!

That is some pretty thick bungee cord..., looks like clutter, out of place.

Conker January 20th, 2013 17:45

And that Manta should go the other way, and farther down the rear (you'd need to add velcro).


All times are GMT -4. The time now is 08:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.