Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Anyone have any problems with the KWA MP9? (https://airsoftcanada.com/showthread.php?t=219929)

jwm470 September 14th, 2019 18:24

Anyone have any problems with the KWA MP9?
 
So I've had my mp9 for a while now, but for some reason it's started to act up and jam on me. It almost looks like the bolt doesn't fully cycle back and will leave a gap. Although the cylinder looks like its resetted its just the bolt thats not cycled. ANyone got any advice?

Drakker September 14th, 2019 20:35

This usually happens when a BB gets inside the gun and blocks the movement of the loading nozzle. It's unfortunately a common problem with this gun.

jwm470 September 14th, 2019 22:09

damn, that's crappy. Any way to remedy it? whenever i looked to see and pulled back the bolt there was no BB in the chamber though.

Drakker September 15th, 2019 15:07

Remove the upper, and see if a BB or something else falls out.

jwm470 September 15th, 2019 15:55

I tried that and nothing came out. I also tried making the disconnector spring looser which did help close the gap a bit but it still has problems. Maybe the actual recoil spring isn't strong enough?

Ratters September 15th, 2019 16:04

mp9
 
There are two long but smaller diameter springs that run along the inside edge of the nozzle to the body (I can't remember their function) but they do at times get completely destroyed and this could be the cause of your problem

Ratters September 15th, 2019 16:07

mp9
 
There are two long but smaller diameter springs that run along the inside edge of the nozzle to the body (I can't remember their function) but they do at times get completely destroyed and this could be the cause of your problem.

Look at the manual and the exploded parts diagram. This will give you a better understanding of what could be going wrong.

Skeletor September 16th, 2019 15:05

Bring it into Blackblitz and we can take a quick look at it. Could be something simple, could need to be submitted for tech work.


All times are GMT -4. The time now is 13:28.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.